In the analogy between electric and magnetic circuits, which magnetic quantity corresponds to emf?
Show answer & solution
Answer: (A) Magnetomotive force (MMF)
MMF drives flux through the magnetic circuit.
Electrical Engineering · Electromagnetic Theory
29 questions, each with the answer and a worked solution.
Practice interactively and track your score →In the analogy between electric and magnetic circuits, which magnetic quantity corresponds to emf?
Answer: (A) Magnetomotive force (MMF)
MMF drives flux through the magnetic circuit.
In the magnetic circuit analogy, which quantity corresponds to electric current?
Answer: (C) Magnetic flux
Φ = MMF/S.
In the magnetic circuit analogy, which quantity corresponds to resistance?
Answer: (A) Reluctance
Reluctance opposes the establishment of flux.
How is the reluctance of a magnetic path of length l, area A and permeability μ calculated?
Answer: (C) S = l/(μA)
Unit: ampere-turns per weber.
What is the unit of reluctance?
Answer: (D) Ampere-turns per weber
Permeance (the reciprocal) is measured in Wb/A-t or henry.
How is magnetomotive force produced by a coil calculated?
Answer: (B) MMF = NI ampere-turns
N is the number of turns and I the current.
What is the MMF of a 200-turn coil carrying 2 A?
Answer: (C) 400 ampere-turns
MMF = 200 × 2.
Why does a small air gap greatly increase the reluctance of an iron magnetic circuit?
Answer: (B) Air has a permeability thousands of times lower than iron
Most of the MMF is used across the air gap.
What is leakage flux in a magnetic circuit?
Answer: (D) Flux that does not follow the intended path through the core or air gap
Leakage flux causes leakage reactance in transformers.
What is fringing in an air gap?
Answer: (A) The spreading of flux lines at the edges of the gap, increasing the effective area
Fringing reduces the gap's effective reluctance slightly.
What does magnetic saturation mean?
Answer: (C) Further increase in H produces little increase in B because the material is fully magnetised
Saturation causes high magnetising currents.
What is retentivity (remanence) of a magnetic material?
Answer: (A) The flux density remaining after the magnetising force is removed
High remanence suits permanent magnets.
What is coercivity of a magnetic material?
Answer: (D) The reverse magnetising force needed to reduce the flux density to zero
Soft magnetic materials have low coercivity.
Which material properties are required for transformer and machine cores?
Answer: (B) High permeability, low coercivity and low hysteresis loss
These are soft magnetic materials.
Which material properties are required for permanent magnets?
Answer: (B) High retentivity and high coercivity
These are hard magnetic materials.
What is the flux in a magnetic circuit with an MMF of 1,000 AT and a reluctance of 10⁶ AT/Wb?
Answer: (C) 1 mWb
Φ = MMF/S = 1000/10⁶ = 10⁻³ Wb.
How are reluctances of magnetic paths in series combined?
Answer: (A) They are added
This is similar to resistances in series.
What is permeance?
Answer: (D) The reciprocal of reluctance
High permeance means flux is easily established.
What is a key difference between electric and magnetic circuits?
Answer: (D) Flux in a magnetic circuit does not involve continuous energy loss like current through resistance
Energy is needed only to establish the flux, apart from core losses.
What does the area enclosed by a B–H hysteresis loop represent?
Answer: (B) The energy lost per cycle per unit volume due to hysteresis
Soft materials have narrow loops.
What is the relative permeability of good quality electrical steel at moderate flux densities?
Answer: (C) Several thousand
Very high permeability reduces magnetising current.
What is the field intensity H in a uniform core of length 0.5 m with an MMF of 500 AT?
Answer: (C) 1,000 A/m
H = MMF/l = 500/0.5.
Why are electromagnetic relays and contactors designed with a small air gap when closed?
Answer: (A) To reduce reluctance and hold the armature with small coil current
A large air gap would need more ampere-turns.
What is the reluctance of an air gap 1 mm long with an area of 0.01 m²?
Answer: (B) About 8 × 10⁴ AT/Wb
S = 0.001/(4π × 10⁻⁷ × 0.01) ≈ 7.96 × 10⁴.
How is the total reluctance of two magnetic paths in parallel found?
Answer: (A) By adding their permeances and taking the reciprocal
This is like resistances in parallel.
Why are transformer cores built without air gaps?
Answer: (C) To keep reluctance and magnetising current low
Joints are overlapped to minimise effective gaps.
Why do some inductors and chokes deliberately include an air gap?
Answer: (D) To prevent core saturation and keep inductance stable with DC current
The gap stores most of the magnetic energy.
What is the magnetising force H for an MMF of 400 AT applied over a 0.2 m path?
Answer: (D) 2,000 A/m
H = 400/0.2.
What is the main cause of hysteresis loss in a magnetic core?
Answer: (C) Repeated reversal of magnetic domains under alternating flux
The loss per cycle equals the loop area.