Which law explains the voltage induced by a changing magnetic flux?
Show answer & solution
Answer: (C) Faraday's law
e = −N dΦ/dt.
Electrical Engineering · Electromagnetic Theory
29 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which law explains the voltage induced by a changing magnetic flux?
Answer: (C) Faraday's law
e = −N dΦ/dt.
What does Lenz's law state?
Answer: (A) The induced emf opposes the change in flux that produces it
It gives the negative sign in Faraday's law.
What emf is induced in a 100-turn coil when its flux changes by 0.02 Wb in 0.1 s?
Answer: (C) 20 V
e = N ΔΦ/Δt = 100 × 0.02/0.1 = 20 V.
What is the motional emf induced in a conductor of length l moving with velocity v perpendicular to a field B?
Answer: (D) e = Blv
This is the basis of generators.
What emf is induced in a 0.2 m conductor moving at 10 m/s perpendicular to a 0.5 T field?
Answer: (B) 1 V
e = 0.5 × 0.2 × 10 = 1 V.
How is self-inductance defined?
Answer: (A) Flux linkage per unit current, L = NΦ/I
Its unit is the henry.
What is the SI unit of inductance?
Answer: (D) Henry
1 H = 1 Wb/A.
What is the inductance of a long solenoid of N turns, cross-section A, length l and permeability μ?
Answer: (C) L = μN²A/l
Inductance rises with the square of turns.
What is mutual inductance?
Answer: (A) The ability of one coil to induce an emf in a nearby coil through changing flux
M = N₂Φ₂₁/I₁.
What are eddy currents?
Answer: (C) Circulating currents induced in a conductor by changing magnetic flux
They cause losses in cores but are used in induction heating and brakes.
What is the energy density stored in a magnetic field?
Answer: (B) B²/(2μ)
It equals ½BH in linear media.
What is the emf induced in a coil of N turns and area A rotating at angular speed ω in a uniform field B?
Answer: (A) e = NBAω sin ωt
This is the principle of the AC generator.
What is the peak emf of a 50-turn coil of area 0.02 m² rotating at 100 rad/s in a 0.1 T field?
Answer: (C) 10 V
Em = NBAω = 50 × 0.1 × 0.02 × 100 = 10 V.
Which rule gives the direction of induced current in a conductor moving in a magnetic field?
Answer: (D) Fleming's right-hand rule
First finger field, second current, thumb motion.
What is the principle of induction heating?
Answer: (B) Eddy currents induced by an alternating magnetic field heat a conductive workpiece
It is used for melting, hardening and cooking.
What is the principle of magnetic braking in trains?
Answer: (A) Eddy currents induced in a conductor oppose motion according to Lenz's law
Eddy current brakes have no contact wear.
What is the induced emf in a coil when the current in a 0.5 H inductor changes at 4 A/s?
Answer: (B) 2 V
e = L di/dt = 0.5 × 4 = 2 V.
What is the mutual inductance of two coils with L₁ = 4 mH, L₂ = 9 mH and coupling coefficient 0.5?
Answer: (B) 3 mH
M = k√(L₁L₂) = 0.5 × 6 = 3 mH.
What is the effect of laminating a core on eddy currents?
Answer: (D) It restricts eddy current paths and reduces eddy current loss
Laminations are insulated from each other.
Which physical law explains why an inductor opposes changes in current?
Answer: (D) Lenz's law
The induced emf acts against the change.
What is the flux linkage of a 200-turn coil with a flux of 5 mWb?
Answer: (C) 1 Wb-turn
λ = NΦ = 200 × 0.005 = 1 Wb-turn.
What happens to the induced emf if the rate of change of flux is doubled?
Answer: (A) It doubles
emf is proportional to dΦ/dt.
What is the principle of a transformer based on?
Answer: (D) Faraday's law of mutual induction
A changing primary flux induces emf in the secondary.
What is the energy stored in a 0.2 H inductor carrying 5 A?
Answer: (C) 2.5 J
W = ½ × 0.2 × 25 = 2.5 J.
What happens to the inductance of a coil if the number of turns is doubled with the same core?
Answer: (B) It becomes four times
L is proportional to N².
What happens to the inductance of a coil if an iron core replaces an air core?
Answer: (C) It increases greatly
Iron's high permeability increases flux linkage.
What is back emf in an inductor?
Answer: (A) The self-induced emf that opposes changes in current
It is given by L di/dt.
What are dynamically induced and statically induced emfs?
Answer: (D) Dynamically induced emf arises from conductor motion; statically induced emf from changing flux in stationary coils
Generators use dynamic induction; transformers use static induction.
What is the coupling coefficient between two coils if all the flux of one links the other?
Answer: (B) 1
k = 1 means perfect coupling.