How is capacitance defined?
Show answer & solution
Answer: (A) The charge stored per unit voltage, C = Q/V
Capacitance is measured in farads.
Electrical Engineering · Electromagnetic Theory
29 questions, each with the answer and a worked solution.
Practice interactively and track your score →How is capacitance defined?
Answer: (A) The charge stored per unit voltage, C = Q/V
Capacitance is measured in farads.
What is the capacitance of a parallel-plate capacitor with plate area A, separation d and permittivity ε?
Answer: (C) C = εA/d
Capacitance increases with area and decreases with spacing.
What is the capacitance of an air parallel-plate capacitor with plate area 0.01 m² and spacing 1 mm?
Answer: (C) About 88.5 pF
C = 8.854 × 10⁻¹² × 0.01/0.001 ≈ 88.5 pF.
What happens to the capacitance of a parallel-plate capacitor if the plate separation is doubled?
Answer: (B) It is halved
C is inversely proportional to d.
What happens to capacitance when a dielectric of relative permittivity εr fills the space between the plates?
Answer: (D) It increases by a factor εr
Dielectrics allow more charge storage at the same voltage.
What is the dielectric strength of an insulating material?
Answer: (A) The maximum electric field it can withstand without breakdown
It is usually given in kV/mm.
What is dielectric polarisation?
Answer: (B) Alignment or displacement of charges in a dielectric under an electric field
Polarisation reduces the net field inside the dielectric.
What is the capacitance of an isolated sphere of radius R in free space?
Answer: (B) 4πε₀R
Larger spheres have larger capacitance.
What is the capacitance per unit length of a coaxial cable with inner radius a and outer radius b?
Answer: (C) 2πε/ln(b/a)
It determines cable charging current.
What does the loss tangent (tan δ) of a dielectric indicate?
Answer: (A) The energy lost in the dielectric relative to energy stored
Low tan δ indicates good insulation quality.
Which boundary condition applies to the tangential component of E at the interface between two dielectrics?
Answer: (D) It is continuous across the boundary
The normal component of D is continuous if there is no surface charge.
What is the approximate relative permittivity of water?
Answer: (C) About 80
Water's high permittivity affects insulation when moisture enters.
What is a feature of electrolytic capacitors?
Answer: (B) They have high capacitance and are polarised
Reverse connection can damage them.
What is displacement current?
Answer: (D) A current term ε∂E/∂t associated with a changing electric field
It explains current through a capacitor.
What is the energy stored in a capacitor charged with charge Q?
Answer: (A) Q²/(2C)
This equals ½CV².
What happens to the energy stored in an isolated charged capacitor when a dielectric slab is inserted?
Answer: (A) It decreases, since capacitance rises while charge stays constant
W = Q²/2C falls as C rises.
What happens to the voltage across a charged, isolated capacitor when its plate separation is increased?
Answer: (B) It increases
With Q constant, V = Q/C rises as C falls.
Which material has a relative permittivity of exactly 1?
Answer: (D) Vacuum
Air is very close to 1.
What is the main purpose of using mica or ceramic in capacitors?
Answer: (C) To provide a stable, high-quality dielectric
Ceramic capacitors are common in electronic circuits.
What causes dielectric breakdown?
Answer: (A) An electric field large enough to free bound charges and form a conducting path
Breakdown can permanently damage solid insulation.
What is the effect of moisture on the permittivity and losses of insulation?
Answer: (B) It increases both permittivity and losses
Moisture degrades insulation performance.
What is the capacitance of a parallel-plate capacitor whose plate area is doubled and spacing halved?
Answer: (B) Four times the original
C = εA/d, so (2A)/(d/2) = 4A/d.
Why do high-voltage cables use graded insulation or intersheaths?
Answer: (A) To make the electric stress more uniform across the insulation
Stress is highest near the conductor.
Where is the electric stress maximum in a single-core cable?
Answer: (D) At the surface of the conductor
Stress varies inversely with radius.
What is the potential gradient in a uniform field of 10 kV across 2 mm of insulation?
Answer: (B) 5 kV/mm
E = V/d = 10/2.
What is the charge stored on a 10 µF capacitor charged to 100 V?
Answer: (C) 1 mC
Q = CV = 10 × 10⁻⁶ × 100.
Which property of a dielectric reduces the electric field inside it compared with free space?
Answer: (A) Polarisation, which creates an opposing internal field
E inside = E₀/εr.
What is a supercapacitor?
Answer: (D) A capacitor with extremely high capacitance per unit volume using electric double layers
Supercapacitors deliver fast bursts of energy.
What is the capacitance between two parallel wires of radius r separated by distance D (D ≫ r) per unit length?
Answer: (A) πε/ln(D/r)
This is used for two-wire transmission lines.