Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Cost & Management Accounting: Materials, Labour & Overheads

Finance · Cost & Management Accounting

42 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the stock level at which a new order for materials should be placed called?

  1. Maximum level
  2. Minimum level
  3. Danger level
  4. Re-order level
Show answer & solution

Answer: (D) Re-order level

Re-order level = maximum usage × maximum lead time.

Question 2

Maximum usage is 500 units per week and maximum lead time is 6 weeks. What is the re-order level?

  1. 2,500 units
  2. 3,500 units
  3. 3,000 units
  4. 500 units
Show answer & solution

Answer: (C) 3,000 units

500 × 6 = 3,000.

Question 3

How is the minimum stock level calculated?

  1. Re-order level + re-order quantity
  2. Average usage × 2
  3. Re-order level − (normal usage × normal lead time)
  4. Maximum usage × lead time
Show answer & solution

Answer: (C) Re-order level − (normal usage × normal lead time)

Stock should not normally fall below this level.

Question 4

Re-order level is 3,000 units, normal usage is 400 units per week and normal lead time is 5 weeks. What is the minimum stock level?

  1. 2,000 units
  2. 5,000 units
  3. 1,000 units
  4. 600 units
Show answer & solution

Answer: (C) 1,000 units

3,000 − (400 × 5) = 1,000.

Question 5

What is the time between placing an order and receiving the materials called?

  1. Cycle time
  2. Lead time
  3. Turnover period
  4. Idle time
Show answer & solution

Answer: (B) Lead time

Longer lead times require higher re-order levels.

Question 6

What is the system of continuous recording of stock receipts and issues called?

  1. Perpetual inventory system
  2. ABC analysis
  3. Periodic inventory system
  4. JIT
Show answer & solution

Answer: (A) Perpetual inventory system

Bin cards and stores ledger maintain perpetual records.

Question 7

Which inventory control technique classifies items by their annual consumption value?

  1. ABC analysis
  2. EOQ
  3. FIFO
  4. LIFO
Show answer & solution

Answer: (A) ABC analysis

Category A items have high value and need strict control.

Question 8

Which method of pricing material issues charges the oldest prices first?

  1. Standard price
  2. Weighted average
  3. LIFO
  4. FIFO
Show answer & solution

Answer: (D) FIFO

Under FIFO, closing stock is valued at the latest prices.

Question 9

Which method of pricing material issues uses the average cost of all units in stock after each receipt?

  1. LIFO
  2. Highest in, first out
  3. FIFO
  4. Weighted average cost
Show answer & solution

Answer: (D) Weighted average cost

It smooths price fluctuations.

Question 10

What is the document authorizing the stores to issue materials to production called?

  1. Goods received note
  2. Material requisition note
  3. Debit note
  4. Purchase requisition
Show answer & solution

Answer: (B) Material requisition note

It is the basis for charging materials to jobs.

Question 11

What is the document requesting the purchasing department to buy materials called?

  1. Purchase requisition
  2. Goods received note
  3. Bin card
  4. Material requisition
Show answer & solution

Answer: (A) Purchase requisition

It is prepared by the storekeeper or user department.

Question 12

What is the record kept in stores showing quantities received, issued and in balance for each item called?

  1. Stores ledger
  2. Job card
  3. Bin card
  4. Clock card
Show answer & solution

Answer: (C) Bin card

The stores ledger records both quantities and values.

Question 13

What is the loss of materials due to evaporation, shrinkage or breakage in normal operations called?

  1. Abnormal loss
  2. Spoilage only
  3. Normal loss (wastage)
  4. Scrap sale
Show answer & solution

Answer: (C) Normal loss (wastage)

Normal loss is absorbed in the cost of good units.

Question 14

What is the rate at which employees leave an organization and are replaced called?

  1. Overtime
  2. Labour efficiency
  3. Labour turnover
  4. Idle time
Show answer & solution

Answer: (C) Labour turnover

Labour turnover = separations ÷ average number of employees × 100.

Question 15

During a year 10 employees left and the average workforce was 200. What is the labour turnover rate?

  1. 2%
  2. 5%
  3. 20%
  4. 10%
Show answer & solution

Answer: (B) 5%

10 ÷ 200 × 100 = 5%.

Question 16

What is the time for which workers are paid but no work is done, such as during machine breakdowns, called?

  1. Productive time
  2. Lead time
  3. Overtime
  4. Idle time
Show answer & solution

Answer: (D) Idle time

Normal idle time is treated as overhead; abnormal idle time is charged to costing profit and loss.

Question 17

What is the wage system in which workers are paid a fixed rate per hour regardless of output called?

  1. Piece rate system
  2. Rowan plan
  3. Halsey premium plan
  4. Time rate system
Show answer & solution

Answer: (D) Time rate system

It gives no direct incentive for higher output.

Question 18

What is the wage system in which workers are paid according to the number of units produced called?

  1. Day rate system
  2. Time rate system
  3. Salary system
  4. Piece rate system
Show answer & solution

Answer: (D) Piece rate system

It rewards efficient workers.

Question 19

Under the Halsey premium plan, what bonus does a worker usually receive?

  1. Time taken × time saved ÷ time allowed × rate
  2. 50% of the time saved multiplied by the hourly rate
  3. A fixed amount
  4. 100% of time saved
Show answer & solution

Answer: (B) 50% of the time saved multiplied by the hourly rate

Some versions use 33⅓% instead of 50%.

Question 20

Time allowed is 10 hours, time taken is 8 hours and the rate is Rs. 100 per hour. What are total earnings under the Halsey plan (50%)?

  1. Rs. 960
  2. Rs. 800
  3. Rs. 900
  4. Rs. 1,000
Show answer & solution

Answer: (C) Rs. 900

800 + 50% × 2 × 100 = 900.

Question 21

Under the Rowan plan, how is the bonus calculated?

  1. Time saved × rate
  2. (Time taken ÷ time allowed) × time saved × hourly rate
  3. Units produced × piece rate
  4. 50% of time saved × rate
Show answer & solution

Answer: (B) (Time taken ÷ time allowed) × time saved × hourly rate

Bonus can never exceed the time-rate wages.

Question 22

Time allowed is 10 hours, time taken is 8 hours and the rate is Rs. 100 per hour. What are total earnings under the Rowan plan?

  1. Rs. 960
  2. Rs. 1,000
  3. Rs. 900
  4. Rs. 800
Show answer & solution

Answer: (A) Rs. 960

Bonus = 8/10 × 2 × 100 = 160; total = 800 + 160.

Question 23

Which incentive plan pays a lower piece rate below standard output and a higher piece rate above it?

  1. Taylor's differential piece rate
  2. Rowan plan
  3. Time rate
  4. Halsey plan
Show answer & solution

Answer: (A) Taylor's differential piece rate

It was devised by F.W. Taylor.

Question 24

What are the indirect costs of materials, labour and expenses called?

  1. Direct costs
  2. Overheads
  3. Prime costs
  4. Selling costs only
Show answer & solution

Answer: (B) Overheads

They are classified into production, administration, selling and distribution overheads.

Question 25

What is the allotment of whole items of overhead to a single cost centre called?

  1. Absorption
  2. Allocation
  3. Reapportionment
  4. Apportionment
Show answer & solution

Answer: (B) Allocation

Apportionment shares an overhead among several cost centres.

Question 26

What is the sharing of an overhead among several cost centres on a suitable basis called?

  1. Apportionment
  2. Classification
  3. Absorption
  4. Allocation
Show answer & solution

Answer: (A) Apportionment

Rent is usually apportioned by floor area.

Question 27

Which basis is most suitable for apportioning factory rent among departments?

  1. Machine hours
  2. Floor area occupied
  3. Number of employees
  4. Value of materials
Show answer & solution

Answer: (B) Floor area occupied

Rent relates to the space used.

Question 28

Which basis is most suitable for apportioning canteen costs among departments?

  1. Number of employees
  2. Machine hours
  3. Value of plant
  4. Floor area
Show answer & solution

Answer: (A) Number of employees

Canteen services are used by employees.

Question 29

What is the transfer of service department costs to production departments called?

  1. Allocation
  2. Classification
  3. Reapportionment (secondary distribution)
  4. Absorption
Show answer & solution

Answer: (C) Reapportionment (secondary distribution)

Methods include direct, step-down and reciprocal methods.

Question 30

What is the charging of overheads to cost units using a predetermined rate called?

  1. Distribution
  2. Absorption
  3. Allocation
  4. Apportionment
Show answer & solution

Answer: (B) Absorption

Common bases are machine hours and labour hours.

Question 31

Budgeted overheads are Rs. 200,000 and budgeted machine hours are 40,000. What is the machine hour absorption rate?

  1. Rs. 0.20 per machine hour
  2. Rs. 20 per machine hour
  3. Rs. 5 per machine hour
  4. Rs. 8 per machine hour
Show answer & solution

Answer: (C) Rs. 5 per machine hour

200,000 ÷ 40,000 = 5.

Question 32

With an absorption rate of Rs. 5 per machine hour, 42,000 actual machine hours and actual overheads of Rs. 205,000, what is the result?

  1. No difference
  2. Over-absorption of Rs. 5,000
  3. Under-absorption of Rs. 5,000
  4. Over-absorption of Rs. 15,000
Show answer & solution

Answer: (B) Over-absorption of Rs. 5,000

Absorbed overheads = 5 × 42,000 = 210,000, more than the actual 205,000.

Question 33

When are overheads said to be under-absorbed?

  1. When absorbed overheads exceed actual
  2. When actual overheads exceed absorbed overheads
  3. When there are no overheads
  4. When they equal
Show answer & solution

Answer: (B) When actual overheads exceed absorbed overheads

Under-absorption is charged to the costing profit and loss account.

Question 34

Which overhead absorption basis is most suitable in a highly mechanized department?

  1. Percentage of direct materials
  2. Machine hour rate
  3. Units of output only
  4. Labour hour rate
Show answer & solution

Answer: (B) Machine hour rate

Machine time drives most costs there.

Question 35

How is the maximum stock level calculated?

  1. Re-order level − normal usage
  2. Minimum level × 2
  3. Re-order level + re-order quantity − (minimum usage × minimum lead time)
  4. Average usage × lead time
Show answer & solution

Answer: (C) Re-order level + re-order quantity − (minimum usage × minimum lead time)

Stock should not normally exceed this level.

Question 36

Re-order level is 3,000 units, re-order quantity is 2,000 units, minimum usage is 300 units per week and minimum lead time is 4 weeks. What is the maximum stock level?

  1. 1,200 units
  2. 5,000 units
  3. 3,800 units
  4. 4,200 units
Show answer & solution

Answer: (C) 3,800 units

3,000 + 2,000 − (300 × 4) = 3,800.

Question 37

Which inventory control technique classifies items as vital, essential and desirable?

  1. EOQ
  2. FIFO
  3. ABC analysis
  4. VED analysis
Show answer & solution

Answer: (D) VED analysis

It is common for spare parts control.

Question 38

What is the record of the time spent by a worker on each job, used to charge labour to jobs, called?

  1. Job card (time booking)
  2. Material requisition
  3. Clock card
  4. Bin card
Show answer & solution

Answer: (A) Job card (time booking)

A clock card records attendance time.

Question 39

How is overtime premium normally treated in cost accounts when overtime is due to general pressure of work?

  1. As direct labour of the job done in overtime
  2. As abnormal loss
  3. As production overhead
  4. As a selling expense
Show answer & solution

Answer: (C) As production overhead

If overtime is at a customer's request, the premium is charged to that job.

Question 40

Which method of reapportioning service department costs fully recognizes services provided by service departments to each other?

  1. High–low method
  2. Reciprocal (repeated distribution or simultaneous equations) method
  3. Direct method
  4. Allocation method
Show answer & solution

Answer: (B) Reciprocal (repeated distribution or simultaneous equations) method

The direct method ignores inter-service department services.

Question 41

What is the overhead absorption rate set in advance using budgeted overheads and activity called?

  1. Predetermined overhead absorption rate
  2. Actual overhead rate
  3. Blanket rate only
  4. Marginal rate
Show answer & solution

Answer: (A) Predetermined overhead absorption rate

Predetermined rates allow costing of jobs during the period.

Question 42

What is a single overhead absorption rate used for the whole factory called?

  1. Blanket (plant-wide) rate
  2. Departmental rate
  3. Activity rate
  4. Machine hour rate
Show answer & solution

Answer: (A) Blanket (plant-wide) rate

Departmental rates are usually more accurate.

Practice these 42 questions interactively →