All the steel trusses of the bridges, have one of their end roller supported, and other end hinged. The main advantage of such a support is that the truss remains stable.
A framed structure is perfect, if the number of members are …………. (2j − 3), where j is the number of joints.
equal to
less than
greater than
either less than or greater than
Show answer & solution
Answer: (A) equal to
A perfect frame satisfies m = 2j - 3.
Question 3
A redundant frame is also called …………. frame.
perfect
imperfect
deficient
Show answer & solution
Answer: (B) imperfect
Redundant frames are a type of imperfect frame having excess members.
Question 4
For coplanar, non-concurrent forces to be in equilibrium, the necessary conditions are
ΣFx = 0 and ΣFy = 0 only
ΣM = 0 only
ΣFx = 0, ΣFy = 0, and ΣM = 0
ΣFx = ΣFy only
Show answer & solution
Answer: (C) ΣFx = 0, ΣFy = 0, and ΣM = 0
General planar equilibrium needs both force-balance equations and a moment-balance equation.
Question 5
According to Lami's theorem, for three coplanar concurrent forces in equilibrium
each force is proportional to the sine of the angle between the other two
each force is proportional to the cosine of the angle between the other two
all three forces must be equal
the forces must be perpendicular
Show answer & solution
Answer: (A) each force is proportional to the sine of the angle between the other two
Lami's theorem: F1/sinα = F2/sinβ = F3/sinγ, where each angle is between the other two forces.
Question 6
A free body diagram shows
a body along with all forces acting on it, isolated from its supports/connections
only the supports of a body
only the internal stresses
the body without any forces
Show answer & solution
Answer: (A) a body along with all forces acting on it, isolated from its supports/connections
A free body diagram isolates the body and replaces supports/connections with their equivalent reaction forces.
Question 7
A roller support provides a reaction
in any direction
perpendicular to the surface on which it rests
parallel to the surface only
in no direction (zero reaction)
Show answer & solution
Answer: (B) perpendicular to the surface on which it rests
A roller can only push/pull normal to the rolling surface; it offers no resistance along the surface.
Question 8
A hinged (pin) support can provide reaction components
only vertical
only horizontal
both horizontal and vertical, but no moment
horizontal, vertical, and moment
Show answer & solution
Answer: (C) both horizontal and vertical, but no moment
A pin allows rotation, so it resists translation (H and V) but cannot resist moment.
Question 9
A fixed support can resist
only vertical force
horizontal force, vertical force, and moment
only moment
no force at all
Show answer & solution
Answer: (B) horizontal force, vertical force, and moment
A fixed (built-in) support resists both translation (H, V) and rotation (moment).
Question 10
The number of unknowns at a roller support in a 2D structure is
1
2
3
0
Show answer & solution
Answer: (A) 1
A roller provides only one unknown reaction, normal to the surface.
Question 11
The number of unknowns at a fixed support in a 2D structure is
1
2
3
0
Show answer & solution
Answer: (C) 3
A fixed support provides three unknowns: horizontal reaction, vertical reaction, and moment.
Question 12
A structure is statically determinate if
the number of unknown reactions equals the number of independent equilibrium equations
unknowns exceed equilibrium equations
unknowns are fewer than equilibrium equations
there are no reactions at all
Show answer & solution
Answer: (A) the number of unknown reactions equals the number of independent equilibrium equations
Determinacy requires the unknowns to exactly match the available equilibrium equations.
Question 13
If unknown reactions exceed the available equilibrium equations, the structure is
statically determinate
statically indeterminate
unstable
a mechanism
Show answer & solution
Answer: (B) statically indeterminate
Excess unknowns relative to equations makes the structure statically indeterminate (redundant).
Question 14
A structure with fewer reactions than required equilibrium equations is
statically determinate
statically indeterminate
unstable (a mechanism)
over-restrained
Show answer & solution
Answer: (C) unstable (a mechanism)
Insufficient reactions cannot maintain equilibrium under general loading, making the structure unstable.
Question 15
A truss is an assembly of members connected at their ends by
rigid (fixed) joints
frictionless pin joints, forming a framework
welded moment connections only
rollers only
Show answer & solution
Answer: (B) frictionless pin joints, forming a framework
Ideal truss theory assumes pin (hinge) connections that transmit no moment.
Question 16
In an ideal (simple) truss analysis, each member is assumed to carry
only axial force, tension or compression
bending moment only
shear force only
torsional force only
Show answer & solution
Answer: (A) only axial force, tension or compression
With pinned joints and loads only at joints, truss members carry purely axial force.
Question 17
The method of joints for truss analysis involves
considering the equilibrium of the entire truss as one unit
considering the equilibrium of forces at each joint individually
cutting the truss and analyzing one section only
ignoring equilibrium conditions entirely
Show answer & solution
Answer: (B) considering the equilibrium of forces at each joint individually
The method of joints applies ΣF = 0 at each joint in turn to solve for member forces.
Question 18
The method of sections for truss analysis is generally preferred when
the forces in only a few specific members are required
all member forces are required
the truss has only two members
the truss is a mechanism
Show answer & solution
Answer: (A) the forces in only a few specific members are required
Cutting a section lets you directly solve for a few targeted member forces without solving the whole truss joint by joint.
Question 19
A zero-force member in a truss is one that
carries no force under the given loading condition
always carries the maximum force
is always removed from the structure
is used only for aesthetics
Show answer & solution
Answer: (A) carries no force under the given loading condition
A zero-force member carries no axial force for the specific loading case being analyzed.
Question 20
At a joint where only two non-collinear members meet and there is no external load, both members are
zero-force members
carrying equal and opposite forces
always in tension
always in compression
Show answer & solution
Answer: (A) zero-force members
With no external load and two non-collinear members, equilibrium at the joint forces both members to carry zero force.
Question 21
At a joint where three members meet, two of which are collinear, with no external load at that joint, the third (non-collinear) member is a
zero-force member
member in maximum tension
member in maximum compression
member of indeterminate force
Show answer & solution
Answer: (A) zero-force member
The non-collinear member has no force component to balance perpendicular to the collinear pair, so it must be zero.
Question 22
A truss is statically determinate (internally) if members m, joints j, and reactions r satisfy
m + r = 2j
m + r > 2j
m + r < 2j
m = j
Show answer & solution
Answer: (A) m + r = 2j
The standard truss determinacy check is m + r = 2j.
Question 23
If m + r > 2j for a truss, the truss is
statically determinate
statically indeterminate (redundant)
a mechanism (unstable)
impossible to construct
Show answer & solution
Answer: (B) statically indeterminate (redundant)
More members/reactions than the determinacy equation requires means the truss has redundant (extra) members.
Question 24
The principle of virtual work states that a system is in equilibrium if the total virtual work done by all forces during a small virtual displacement is
maximum
zero
negative
equal to the applied force
Show answer & solution
Answer: (B) zero
Equilibrium under virtual work theory requires the total virtual work of all forces to vanish for any admissible virtual displacement.
Question 25
The method of virtual work is particularly useful for
analyzing determinate structures under a single point load only
finding support reactions or internal forces in structures using energy methods rather than direct force equilibrium
determining material properties
measuring angles only
Show answer & solution
Answer: (B) finding support reactions or internal forces in structures using energy methods rather than direct force equilibrium
Virtual work provides an energy-based alternative to direct equilibrium equations for finding reactions/forces.
Question 26
A virtual displacement is
an actual, physically occurring displacement
an imaginary, infinitesimally small displacement consistent with the constraints of the system
always equal to the real displacement
always zero
Show answer & solution
Answer: (B) an imaginary, infinitesimally small displacement consistent with the constraints of the system
A virtual displacement is a hypothetical, small, kinematically admissible displacement, not an actual one.
Question 27
In simple machines, the principle of virtual work leads directly to the relationship
Effort × distance moved by effort = Load × distance moved by load (for an ideal machine)
Effort = Load always
distance moved by effort = distance moved by load always
Effort/Load = constant regardless of machine type
Show answer & solution
Answer: (A) Effort × distance moved by effort = Load × distance moved by load (for an ideal machine)
For an ideal, frictionless machine, virtual work gives Effort × effort distance = Load × load distance.
Question 28
The unit of virtual work, like actual work, is expressed in
Newtons
Joules (N-m)
Watts
Pascals
Show answer & solution
Answer: (B) Joules (N-m)
Work (real or virtual) has units of force × distance, i.e. Joules.
Question 29
The resultant of a system of coplanar forces in equilibrium is
always maximum
zero, with zero resultant moment as well
equal to the largest individual force
undefined
Show answer & solution
Answer: (B) zero, with zero resultant moment as well
Equilibrium requires both the resultant force and the resultant moment to be zero.
Question 30
A support that offers resistance to translation in one direction only (normal to the surface) and none to rotation is called a
fixed support
roller support
hinged support
simple support providing only friction
Show answer & solution
Answer: (B) roller support
A roller resists motion only normal to the rolling surface and allows both rotation and lateral movement.
Question 31
A cantilever beam is one that is
supported at both ends
fixed at one end and free at the other
simply supported at both ends
supported only at the middle
Show answer & solution
Answer: (B) fixed at one end and free at the other
A cantilever has one fixed end providing full restraint, and a free (unsupported) end.
Question 32
A simply supported beam is one that
rests freely on supports at both ends, typically one pinned and one roller
is fixed rigidly at both ends
is fixed at one end and free at the other
has no supports at all
Show answer & solution
Answer: (A) rests freely on supports at both ends, typically one pinned and one roller
A simply supported beam has end supports (commonly a pin and a roller) that provide vertical reactions but no moment restraint.
Question 33
An overhanging beam is a simply supported beam that
extends beyond one or both of its supports
is fixed at both ends
is supported only in the middle
has no overhang whatsoever
Show answer & solution
Answer: (A) extends beyond one or both of its supports
An overhanging beam has a portion of its length projecting beyond one or both supports.
Question 34
For a simply supported beam of span L carrying a single point load W at mid-span, each support reaction is
W
W/2
W/4
2W
Show answer & solution
Answer: (B) W/2
By symmetry, a central point load is shared equally between the two supports, each carrying W/2.
Question 35
For a simply supported beam of span L carrying a uniformly distributed load w per unit length over its entire span, each support reaction is
wL
wL/2
wL/4
2wL
Show answer & solution
Answer: (B) wL/2
Total load is wL, and by symmetry each support carries half of it, wL/2.
Question 36
A cable or a string can only support a
compressive force
tensile force
bending moment
shear force
Show answer & solution
Answer: (B) tensile force
Flexible cables/strings cannot resist compression, bending, or shear; they can only carry tension.
Question 37
A two-force member (a member acted upon by forces at only two points, with no other loads) must have those two forces
equal in magnitude, opposite in direction, and collinear along the line joining the two points
perpendicular to each other
unequal in magnitude always
acting only as a couple
Show answer & solution
Answer: (A) equal in magnitude, opposite in direction, and collinear along the line joining the two points
For equilibrium of a two-force member, the two forces must be equal, opposite, and act along the line joining their points of application.
Question 38
The resultant of a system of parallel forces acting on a rigid body, if not zero, is a single force whose line of action can be located using the principle of
moments
virtual work only
friction
impulse
Show answer & solution
Answer: (A) moments
The principle of moments (Varignon's theorem) is used to find the position of the resultant of parallel forces.
Question 39
Static equilibrium of a rigid body in three dimensions requires satisfying a total of
2 independent equations
3 independent equations
6 independent equations (3 force and 3 moment equations)
1 equation only
Show answer & solution
Answer: (C) 6 independent equations (3 force and 3 moment equations)
Full 3D equilibrium needs ΣFx = ΣFy = ΣFz = 0 and ΣMx = ΣMy = ΣMz = 0, six equations in total.
Question 40
The unit of moment (or torque) in the SI system is the
Newton (N)
Newton-meter (N-m)
Joule per second
Pascal
Show answer & solution
Answer: (B) Newton-meter (N-m)
Moment/torque = force × distance, giving units of Newton-meters.
Question 41
Which of the following best defines the term 'equilibrant' of a force system?
The resultant of the force system
A single force equal in magnitude but opposite in direction to the resultant, which brings the system into equilibrium
The sum of all the applied forces
The moment of the resultant
Show answer & solution
Answer: (B) A single force equal in magnitude but opposite in direction to the resultant, which brings the system into equilibrium
The equilibrant is the force that exactly cancels the resultant, restoring equilibrium.
Question 42
The three forces acting on a two-dimensional rigid body in equilibrium, if not parallel, must generally
all pass through a common point (be concurrent)
be equal in magnitude
act in the same direction
have no relationship at all
Show answer & solution
Answer: (A) all pass through a common point (be concurrent)
For three non-parallel forces to keep a rigid body in equilibrium, they must be concurrent (meet at a single point).
Question 43
A body is said to be in stable equilibrium if, when slightly displaced, it
tends to move further away from its original position
tends to return to its original position
remains in its displaced position permanently
rotates indefinitely
Show answer & solution
Answer: (B) tends to return to its original position
Stable equilibrium is characterized by a restoring tendency back toward the original equilibrium position.
Question 44
A body is in unstable equilibrium if, when slightly displaced, it
returns to its original position
tends to move further away from its original equilibrium position
stays exactly where it was displaced to
oscillates forever without loss
Show answer & solution
Answer: (B) tends to move further away from its original equilibrium position
Unstable equilibrium means any small displacement causes the body to move further from equilibrium.
Question 45
A body is in neutral equilibrium if, when displaced to a new position, it
returns to its original position
moves further away from the original position
remains in equilibrium in the new position as well, with no tendency to move further or return
becomes unstable
Show answer & solution
Answer: (C) remains in equilibrium in the new position as well, with no tendency to move further or return
Neutral equilibrium means a displaced body stays in equilibrium in its new position, with no tendency to move further or return.
More Civil Engineering Engineering Mechanics practice