Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Engineering Mechanics: Friction & Simple Machines

Civil Engineering · Engineering Mechanics

37 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

A body will begin to move down an inclined plane if the angle of inclination of the plane is ………. the angle of friction.

  1. equal to
  2. less than
  3. greater than
Show answer & solution

Answer: (C) greater than

Sliding occurs when the plane's inclination exceeds the angle of friction.

Question 2

An ideal machine is one whose efficiency is:

  1. between 60 and 70%
  2. between 70 and 80%
  3. between 80 and 90%
  4. 100%
Show answer & solution

Answer: (D) 100%

An ideal machine has zero friction losses, yielding 100% efficiency.

Question 3

A machine having an efficiency less than 50%, is known as:

  1. reversible machine
  2. non-reversible machine
  3. neither
  4. ideal machine
Show answer & solution

Answer: (B) non-reversible machine

Machines with efficiency under 50% are self-locking (non-reversible).

Question 4

A machine having an efficiency greater than 50%, is known as:

  1. reversible machine
  2. non-reversible machine
  3. neither
  4. ideal machine
Show answer & solution

Answer: (A) reversible machine

Efficiency above 50% allows the machine to run in reverse under load removal (reversible machine).

Question 5

A machine which is capable of doing work in the reversed direction, after the effort is removed, is called a non-reversible machine.

  1. Yes
  2. No
Show answer & solution

Answer: (B) No

That defines a reversible machine, not a non-reversible one.

Question 6

A screw jack used for lifting the loads is:

  1. a reversible machine
  2. a non-reversible machine
  3. an ideal machine
  4. none of these
Show answer & solution

Answer: (B) a non-reversible machine

Screw jacks are designed to be self-locking (non-reversible) so loads don't drop when effort is removed.

Question 7

The velocity ratio for the second system of pulleys is n.

  1. True
  2. False
Show answer & solution

Answer: (A) True

In the second system of pulleys, VR equals the total number of pulleys (n).

Question 8

Friction is defined as the

  1. force that assists relative motion between two surfaces
  2. force that opposes relative motion (or tendency of motion) between surfaces in contact
  3. force perpendicular to a surface only
  4. force generated only in fluids
Show answer & solution

Answer: (B) force that opposes relative motion (or tendency of motion) between surfaces in contact

Friction always opposes relative sliding or the tendency toward it between contacting surfaces.

Question 9

The friction acting on a body at rest, opposing the tendency of motion, is called

  1. kinetic friction
  2. static friction
  3. rolling friction
  4. fluid friction
Show answer & solution

Answer: (B) static friction

Static friction resists the tendency of a stationary body to start moving.

Question 10

The friction acting on a body already in motion is called

  1. static friction
  2. kinetic (dynamic) friction
  3. limiting friction only
  4. angle of friction
Show answer & solution

Answer: (B) kinetic (dynamic) friction

Kinetic (or dynamic) friction acts once relative sliding has begun.

Question 11

Limiting friction is the

  1. friction force at the exact point just before motion begins
  2. friction that acts continuously during motion
  3. minimum friction possible
  4. friction independent of normal reaction
Show answer & solution

Answer: (A) friction force at the exact point just before motion begins

Limiting friction is the maximum static friction, reached just before sliding starts.

Question 12

The coefficient of friction (μ) is defined as the ratio of

  1. limiting friction to normal reaction
  2. normal reaction to limiting friction
  3. applied force to weight
  4. weight to normal reaction
Show answer & solution

Answer: (A) limiting friction to normal reaction

μ = limiting friction (F) / normal reaction (N).

Question 13

The angle of friction is the angle between the

  1. normal reaction and the resultant of normal reaction and limiting friction
  2. applied force and the horizontal
  3. weight and the normal reaction
  4. two friction forces
Show answer & solution

Answer: (A) normal reaction and the resultant of normal reaction and limiting friction

The angle of friction φ is formed between the normal reaction and the resultant reaction (normal + friction).

Question 14

The relationship between coefficient of friction μ and angle of friction φ is

  1. μ = tanφ
  2. μ = sinφ
  3. μ = cosφ
  4. μ = cotφ
Show answer & solution

Answer: (A) μ = tanφ

By definition, μ = tanφ.

Question 15

The angle of repose is the

  1. angle of the maximum inclined plane at which a body remains in equilibrium under gravity alone, without sliding
  2. angle between two friction forces
  3. angle of a couple
  4. angle of a resultant force
Show answer & solution

Answer: (A) angle of the maximum inclined plane at which a body remains in equilibrium under gravity alone, without sliding

Angle of repose is the steepest incline angle at which a body stays at rest under gravity alone.

Question 16

For a body on an incline with only gravity acting, the angle of repose is numerically equal to the

  1. angle of friction
  2. angle of projection
  3. angle of banking
  4. angle of a couple
Show answer & solution

Answer: (A) angle of friction

In this special case, tan(angle of repose) = μ = tan(angle of friction), so the two angles are equal.

Question 17

Kinetic friction is generally

  1. greater than static (limiting) friction
  2. less than or equal to static (limiting) friction
  3. exactly equal to static friction always
  4. unrelated to static friction
Show answer & solution

Answer: (B) less than or equal to static (limiting) friction

Kinetic friction coefficients are typically slightly lower than the corresponding static (limiting) friction coefficient.

Question 18

Friction force is generally considered to be independent of the

  1. normal reaction
  2. nature of surfaces in contact
  3. apparent area of contact between surfaces
  4. none of these; it depends on all listed factors
Show answer & solution

Answer: (C) apparent area of contact between surfaces

Classical friction theory holds that friction is independent of the apparent contact area, but depends on normal load and surface nature.

Question 19

The laws of friction state that friction force is directly proportional to the

  1. area of contact
  2. normal reaction between the surfaces
  3. velocity of sliding
  4. temperature of the surfaces
Show answer & solution

Answer: (B) normal reaction between the surfaces

Friction force F = μN, proportional to the normal reaction N.

Question 20

A ladder resting against a wall is more likely to slip when

  1. the angle of inclination with the ground is increased
  2. the angle of inclination with the ground is decreased
  3. the ladder is shortened
  4. the wall is made rougher
Show answer & solution

Answer: (B) the angle of inclination with the ground is decreased

A shallower angle (closer to horizontal) increases the horizontal force component, raising the tendency to slip.

Question 21

The efficiency of a screw jack is maximum when the helix angle α and angle of friction φ satisfy

  1. α = 45° − φ/2
  2. α = 45° + φ/2
  3. α = φ
  4. α = 90° − φ
Show answer & solution

Answer: (A) α = 45° − φ/2

Maximizing the standard screw-jack efficiency expression gives the condition α = 45° − φ/2.

Question 22

A screw jack is said to be self-locking if

  1. the angle of friction is greater than or equal to the helix angle
  2. the helix angle is greater than the angle of friction
  3. there is no friction at all
  4. the load is very small
Show answer & solution

Answer: (A) the angle of friction is greater than or equal to the helix angle

Self-locking occurs when friction alone can hold the load without the screw unwinding, i.e. φ ≥ α.

Question 23

Rolling friction is generally

  1. greater than sliding friction
  2. much smaller in magnitude than sliding friction
  3. equal to sliding friction always
  4. independent of the shape of the body
Show answer & solution

Answer: (B) much smaller in magnitude than sliding friction

Rolling friction is typically much lower than sliding friction for the same surfaces, which is why wheels are efficient.

Question 24

Belt friction (as in belt drives or band brakes) is analyzed using the relation

  1. T1/T2 = e^(μθ)
  2. T1/T2 = μθ
  3. T1 = T2 always
  4. T1 + T2 = μθ
Show answer & solution

Answer: (A) T1/T2 = e^(μθ)

The belt-friction (capstan) equation relates tight-side and slack-side tensions as T1/T2 = e^(μθ).

Question 25

In the belt friction formula, θ represents the

  1. angle of friction
  2. angle of contact (lap) between the belt and pulley
  3. angle of the incline
  4. angle of repose
Show answer & solution

Answer: (B) angle of contact (lap) between the belt and pulley

θ is the angle of wrap/contact of the belt around the pulley.

Question 26

A simple machine is a device that

  1. always reduces the effort required to overcome a load, and always has 100% efficiency
  2. helps overcome a large resistance (load) by applying a comparatively smaller force (effort), though usually with less than 100% efficiency
  3. increases both effort and load equally
  4. is used only to measure force
Show answer & solution

Answer: (B) helps overcome a large resistance (load) by applying a comparatively smaller force (effort), though usually with less than 100% efficiency

Real machines gain mechanical advantage but suffer losses (mainly friction), so efficiency is less than 100%.

Question 27

Mechanical advantage (MA) of a machine is defined as the ratio of

  1. load to effort
  2. effort to load
  3. distance moved by load to distance moved by effort
  4. input work to output work
Show answer & solution

Answer: (A) load to effort

MA = load (resistance overcome) / effort (applied force).

Question 28

Velocity ratio (VR) of a machine is defined as the ratio of the

  1. distance moved by the load to the distance moved by the effort
  2. distance moved by the effort to the distance moved by the load
  3. load to the effort
  4. effort to the load
Show answer & solution

Answer: (B) distance moved by the effort to the distance moved by the load

VR = distance moved by the effort / distance moved by the load, a purely geometric property of the machine.

Question 29

The efficiency of a machine is defined as the ratio of

  1. mechanical advantage to velocity ratio
  2. velocity ratio to mechanical advantage
  3. load to effort only
  4. effort to load only
Show answer & solution

Answer: (A) mechanical advantage to velocity ratio

Efficiency η = MA / VR (expressed as a percentage).

Question 30

For an ideal machine (no friction, 100% efficient), the mechanical advantage equals the

  1. load
  2. effort
  3. velocity ratio
  4. zero
Show answer & solution

Answer: (C) velocity ratio

When efficiency is 100%, MA = VR by definition of efficiency = MA/VR.

Question 31

In practice, the mechanical advantage of a real machine is generally

  1. equal to its velocity ratio
  2. less than its velocity ratio, due to friction and other losses
  3. always greater than its velocity ratio
  4. unrelated to its velocity ratio
Show answer & solution

Answer: (B) less than its velocity ratio, due to friction and other losses

Friction and other losses make real MA always less than the ideal value (VR).

Question 32

A lever is an example of a simple machine that works on the principle of

  1. moments (torque balance about the fulcrum)
  2. friction alone
  3. hydraulic pressure
  4. inclined plane theory only
Show answer & solution

Answer: (A) moments (torque balance about the fulcrum)

A lever balances the moments of effort and load about the fulcrum.

Question 33

In a first-class lever, the fulcrum is located

  1. between the effort and the load
  2. at one end, with the load at the other end and effort in between
  3. at one end, with the effort at the other end and load in between
  4. it has no fixed fulcrum
Show answer & solution

Answer: (A) between the effort and the load

A first-class lever (like a seesaw) has the fulcrum positioned between the effort and the load.

Question 34

The velocity ratio of a simple inclined plane (used to raise a load by pulling it up the slope) is given by the ratio of

  1. length of the incline to its height
  2. height of the incline to its length
  3. base of the incline to its height
  4. effort to load
Show answer & solution

Answer: (A) length of the incline to its height

VR of an inclined plane = length of slope / height risen, since the effort moves along the slope while the load rises vertically.

Question 35

The velocity ratio of a wheel and axle system is given by the ratio of the

  1. radius of the wheel to the radius of the axle
  2. radius of the axle to the radius of the wheel
  3. load to the effort
  4. effort to the load
Show answer & solution

Answer: (A) radius of the wheel to the radius of the axle

VR = radius of the (larger) wheel / radius of the (smaller) axle.

Question 36

In a simple pulley system used only to change the direction of an applied force (single fixed pulley), the velocity ratio is

  1. 0
  2. 1
  3. 2
  4. infinite
Show answer & solution

Answer: (B) 1

A single fixed pulley only redirects the force; the load and effort move equal distances, so VR = 1.

Question 37

A screw jack is a simple machine that converts

  1. rotary motion of the effort into linear motion of the load
  2. linear motion into linear motion only
  3. linear motion into rotary motion only
  4. no motion at all, being purely static
Show answer & solution

Answer: (A) rotary motion of the effort into linear motion of the load

Turning the screw (rotary effort) raises or lowers the load linearly.

Practice these 37 questions interactively →