The term ‘force’ may be defined as an agent which produces or tends to produce, destroys or tends to destroy motion.
Agree
Disagree
Show answer & solution
Answer: (A) Agree
By definition, a force is an external agency that changes or tends to change the state of rest or uniform motion of a body.
Question 2
The unit of force in S.I. system of units is:
dyne
kilogram
newton
watt
Show answer & solution
Answer: (C) newton
The standard International (S.I.) unit of force is the Newton (N).
Question 3
One kg force is equal to:
7.8 N
8.9 N
9.8 N
12 N
Show answer & solution
Answer: (C) 9.8 N
One kilogram-force (kgf) equals the gravitational force acting on 1 kg of mass under standard acceleration (9.8 m/s²).
Question 4
A resultant force is a single force which produces the same effect as produced by all the given forces acting on a body.
True
False
Show answer & solution
Answer: (A) True
This is the fundamental definition of a resultant force in mechanics.
Question 5
The process of finding out the resultant force is called ______ of forces.
composition
resolution
Show answer & solution
Answer: (A) composition
Composition refers to combining multiple forces into a single resultant force.
Question 6
The algebraic sum of the resolved parts of a number of forces in a given direction is equal to the resolved part of their resultant in the same direction. This is known as:
principle of independence of forces
principle of resolution of forces
principle of transmissibility of forces
none of these
Show answer & solution
Answer: (B) principle of resolution of forces
This statement defines the principle of resolution of forces.
Question 7
Vectors method for the resultant force is also called polygon law of forces.
Correct
Incorrect
Show answer & solution
Answer: (A) Correct
The polygon law is a graphical vector method used to determine the resultant of multiple concurrent forces.
Question 8
The resultant of two forces P and Q acting at an angle θ is:
√(P² + Q² + 2PQ sin θ)
√(P² + Q² + 2PQ cos θ)
√(P² + Q² − 2PQ cos θ)
√(P² + Q² − 2PQ tan θ)
Show answer & solution
Answer: (B) √(P² + Q² + 2PQ cos θ)
Derived via the parallelogram law of forces: R = √(P² + Q² + 2PQ cos θ).
Question 9
If the resultant of two forces P and Q acting at an angle θ, makes an angle α with the force P, then:
tan α = P sin θ / (P + Q cos θ)
tan α = P cos θ / (P + Q cos θ)
tan α = Q sin θ / (P + Q cos θ)
tan α = Q cos θ / (P + Q sin θ)
Show answer & solution
Answer: (C) tan α = Q sin θ / (P + Q cos θ)
The direction of the resultant vector relative to force P is given by tan α = Q sin θ / (P + Q cos θ).
Question 10
The resultant of two forces P and Q (such that P > Q) acting along the same straight line, but in opposite direction, is given by:
P + Q
P − Q
P / Q
Q / P
Show answer & solution
Answer: (B) P − Q
When acting in opposite directions along the same line, the net effect is their algebraic difference (P - Q).
Question 11
The resultant of two equal forces P making an angle θ, is given by:
2P sin θ/2
2P cos θ/2
2P tan θ/2
2P cot θ/2
Show answer & solution
Answer: (B) 2P cos θ/2
Substituting P = Q into the resultant formula yields 2P cos(θ/2).
Question 12
The resultant of two forces each equal to P and acting at right angles is:
P/√2
P/2
P/2√2
√2 P
Show answer & solution
Answer: (D) √2 P
For θ = 90°, 2P cos(45°) = √2 P.
Question 13
The angle between two forces when the resultant is maximum and minimum respectively are:
0° and 180°
180° and 0°
90° and 180°
90° and 0°
Show answer & solution
Answer: (A) 0° and 180°
Maximum resultant occurs at 0° (same direction) and minimum at 180° (opposite directions).
Question 14
If the resultant of two equal forces has the same magnitude as either of the forces, then the angle between the two forces is:
30°
60°
90°
120°
Show answer & solution
Answer: (D) 120°
Solving P² = 2P² + 2P² cos θ yields cos θ = -0.5, so θ = 120°.
Question 15
Two forces are acting at an angle of 120°. The bigger force is 40 N and the resultant is perpendicular to the smaller one. The smaller force is:
20 N
40 N
80 N
none of these
Show answer & solution
Answer: (A) 20 N
Using Q + P cos θ = 0, Q + 40(-0.5) = 0 => Q = 20 N.
Question 16
The terms ‘leverage’ and ‘mechanical advantage’ of a compound lever have got the same meaning.
Right
Wrong
Show answer & solution
Answer: (A) Right
In simple machines and levers, leverage and mechanical advantage describe the force amplification ratio.
Question 17
If a number of forces are acting at a point, their resultant is given by:
(ΣV)² + (ΣH)²
√((ΣV)² + (ΣH)²)
(ΣV)² + (ΣH)² + 2(ΣV)(ΣH)
√((ΣV)² + (ΣH)² + 2(ΣV)(ΣH))
Show answer & solution
Answer: (B) √((ΣV)² + (ΣH)²)
Resultant magnitude of orthogonal components is the square root of the sum of their squares.
Question 18
If a number of forces are acting at a point, their resultant will be inclined at an angle θ with the horizontal, such that:
tan θ = ΣH/ΣV
tan θ = ΣV/ΣH
tan θ = ΣV × ΣH
tan θ = √(ΣV + ΣH)
Show answer & solution
Answer: (B) tan θ = ΣV/ΣH
Direction is given by the ratio of vertical to horizontal components (tan θ = ΣV / ΣH).
Question 19
The triangle law of forces states that if two forces acting simultaneously on a particle be represented in magnitude and direction by two sides of a triangle taken in order, their resultant is represented by the third side taken in opposite order.
True
False
Show answer & solution
Answer: (A) True
This is the standard statement of the triangle law of forces.
Question 20
Concurrent forces are those forces whose lines of action:
lie on the same line
meet at one point
meet on the same plane
none of these
Show answer & solution
Answer: (B) meet at one point
Concurrent forces intersect at a single common point.
Question 21
The forces, which meet at one point and their lines of action also lie on the same plane, are known as:
coplanar concurrent forces
coplanar non-concurrent forces
non-coplanar concurrent forces
non-coplanar non-concurrent forces
Show answer & solution
Answer: (A) coplanar concurrent forces
Coplanar concurrent forces lie in the same plane and intersect at one point.
Question 22
The forces which meet at one point, but their lines of action …………… on the same plane, are known as non-coplanar concurrent forces.
lie
do not lie
Show answer & solution
Answer: (B) do not lie
Non-coplanar forces do not lie within the same single plane.
Question 23
If three forces acting at a point are represented in magnitude and direction by the three sides of a triangle, taken in order, then the forces are in equilibrium.
Yes
No
Show answer & solution
Answer: (A) Yes
When three forces form a closed triangle in order, they represent a balanced force system (equilibrium).
Question 24
If a number of coplanar forces acting at a point be in equilibrium, the sum of clockwise moments must be ……….. the sum of anticlockwise moments, about any point.
equal to
less than
greater than
Show answer & solution
Answer: (A) equal to
For rotational equilibrium, the total clockwise moments must balance the total anticlockwise moments.
Question 25
Varignon’s theorem of moments states that the algebraic sum of their moments about any point is equal to:
zero
the moment of their resultant force about the same point
the sum of the forces
none of these
Show answer & solution
Answer: (B) the moment of their resultant force about the same point
Varignon's theorem equates the sum of component moments to the moment of the resultant force.
Question 26
A smooth cylinder lying on its convex surface remains in ……… equilibrium.
stable
unstable
neutral
Show answer & solution
Answer: (B) unstable
A cylinder resting on a convex surface tends to topple over upon slight displacement, making it unstable.
Question 27
A smooth cylinder lying on a …………… is in neutral equilibrium.
curved surface
convex surface
horizontal surface
Show answer & solution
Answer: (C) horizontal surface
A cylinder on a flat horizontal plane remains in neutral equilibrium when rolled slightly, as its C.G. height does not change.
Question 28
A couple produces:
translatory motion
rotational motion
combined translatory and rotational motion
none of the above
Show answer & solution
Answer: (B) rotational motion
A couple results in pure rotation because the net translational force is zero.
Question 29
Engineering mechanics is broadly divided into
Statics and Dynamics
Statics and Kinematics only
Dynamics and Kinetics only
Mechanics and Thermodynamics
Show answer & solution
Answer: (A) Statics and Dynamics
Mechanics of rigid bodies is split into statics (bodies in equilibrium) and dynamics (bodies in motion).
Question 30
A quantity having magnitude, direction, and obeying the parallelogram law of addition is called a
Scalar
Vector
Tensor
Scalar-vector
Show answer & solution
Answer: (B) Vector
A vector is defined by magnitude and direction and combines according to the parallelogram/triangle law.
Question 31
The SI unit of mass is the
Newton
Kilogram
Pascal
Joule
Show answer & solution
Answer: (B) Kilogram
Kilogram (kg) is the SI base unit of mass.
Question 32
1 Newton is the force required to give a mass of 1 kg an acceleration of
1 cm/s²
1 m/s²
9.81 m/s²
1 mm/s²
Show answer & solution
Answer: (B) 1 m/s²
By definition, F = ma, so 1 N = 1 kg × 1 m/s².
Question 33
Weight of a body is
a scalar quantity independent of location
the force of gravity acting on its mass, a vector quantity
the same as its mass
always constant regardless of location
Show answer & solution
Answer: (B) the force of gravity acting on its mass, a vector quantity
Weight = mg, a force (vector) directed toward the earth's center; it varies slightly with local g, unlike mass.
Question 34
A rigid body is one in which
the distance between any two particles remains constant regardless of applied forces
particles can move freely relative to each other
only translation is possible
only rotation is possible
Show answer & solution
Answer: (A) the distance between any two particles remains constant regardless of applied forces
An idealized rigid body does not deform, so inter-particle distances stay fixed under load.
Question 35
The branch of mechanics dealing with bodies at rest or moving with constant velocity under balanced forces is
Kinematics
Kinetics
Statics
Dynamics
Show answer & solution
Answer: (C) Statics
Statics studies bodies in equilibrium, i.e. at rest or moving at constant velocity.
Question 36
Kinematics deals with
motion of bodies without considering the forces causing it
forces causing motion
equilibrium of forces
energy transformations only
Show answer & solution
Answer: (A) motion of bodies without considering the forces causing it
Kinematics describes motion geometrically (displacement, velocity, acceleration) without reference to causing forces.
Question 37
Kinetics deals with
motion considered together with the forces causing it
motion without considering forces
bodies at rest only
geometry of motion only
Show answer & solution
Answer: (A) motion considered together with the forces causing it
Kinetics relates the motion of bodies to the forces that produce it.
Question 38
A force is completely defined by its
magnitude alone
magnitude, direction, and point of application
direction alone
point of application alone
Show answer & solution
Answer: (B) magnitude, direction, and point of application
A force needs magnitude, direction, and point of application (or line of action) to be fully specified.
Question 39
The effect of a force on a rigid body remains unchanged if it is moved along its line of action. This is known as the
Principle of transmissibility
Principle of superposition
Parallelogram law
Triangle law
Show answer & solution
Answer: (A) Principle of transmissibility
The principle of transmissibility states that a force's external effect on a rigid body is unchanged when it slides along its line of action.
Question 40
According to the parallelogram law, if two forces at a point are represented by adjacent sides of a parallelogram, the resultant is represented by
the other two sides
the diagonal of the parallelogram through that point
the perimeter of the parallelogram
the shorter diagonal only
Show answer & solution
Answer: (B) the diagonal of the parallelogram through that point
The parallelogram law states the resultant is the diagonal drawn from the point of application of the two forces.
Question 41
The component of a force F along a direction making angle θ with the force is
F sinθ
F cosθ
F tanθ
F/cosθ
Show answer & solution
Answer: (B) F cosθ
The component of a force along a given direction equals F cosθ, where θ is the angle between them.
Question 42
Two forces are called like parallel forces if they
act in the same direction and are parallel
act in opposite directions and are parallel
intersect at a point
are perpendicular to each other
Show answer & solution
Answer: (A) act in the same direction and are parallel
Like parallel forces are parallel and act in the same direction.
Question 43
Two forces are called unlike parallel forces if they
act in the same direction
act in opposite directions but are parallel
are equal in magnitude only
always intersect
Show answer & solution
Answer: (B) act in opposite directions but are parallel
Unlike parallel forces are parallel but act in opposite directions.
Question 44
A couple consists of
two equal and opposite parallel forces not acting along the same line
two equal forces acting along the same line
two unequal forces
a single force only
Show answer & solution
Answer: (A) two equal and opposite parallel forces not acting along the same line
A couple is a pair of equal, opposite, non-collinear parallel forces that produces pure rotation.
Question 45
The moment of a couple is given by
the algebraic sum of the two forces
the product of one force and the perpendicular distance between them
the product of the forces
the ratio of the forces
Show answer & solution
Answer: (B) the product of one force and the perpendicular distance between them
Couple moment = force × perpendicular distance between the two forces (the arm of the couple).
Question 46
The moment of a force about a point is defined as the product of
the force and the perpendicular distance from the point to its line of action
the force and its own length
two forces
the force and time
Show answer & solution
Answer: (A) the force and the perpendicular distance from the point to its line of action
Moment = force × perpendicular distance from the moment center to the force's line of action.
Question 47
A system of forces is called collinear if
all forces act along the same line of action
all forces meet at a point
all forces are parallel but not on the same line
forces act in different planes
Show answer & solution
Answer: (A) all forces act along the same line of action
Collinear forces share the same line of action.
More Civil Engineering Engineering Mechanics practice