Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Stoichiometry: Material Balances

Chemical Engineering · Stoichiometry

34 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the general material balance equation for a system?

  1. Input = Output always
  2. Input − Output + Generation − Consumption = Accumulation
  3. Generation = Consumption always
  4. Input + Output = Accumulation
Show answer & solution

Answer: (B) Input − Output + Generation − Consumption = Accumulation

For steady-state non-reactive systems, input equals output.

Question 2

What is the accumulation term in a steady-state process?

  1. Infinite
  2. Zero
  3. Equal to output
  4. Equal to input
Show answer & solution

Answer: (B) Zero

Nothing changes with time at steady state.

Question 3

What is a tie component in material balances?

  1. A component that passes unchanged from one stream to another, linking the streams
  2. A component in the purge only
  3. A catalyst
  4. A reacting component
Show answer & solution

Answer: (A) A component that passes unchanged from one stream to another, linking the streams

Inert solids or nitrogen often serve as tie components.

Question 4

Why is a purge stream used in processes with recycle?

  1. To increase conversion directly
  2. To remove products only
  3. To prevent accumulation of inerts or impurities in the recycle loop
  4. To add reactants
Show answer & solution

Answer: (C) To prevent accumulation of inerts or impurities in the recycle loop

Ammonia synthesis loops purge argon and methane.

Question 5

A butane isomerisation process produces 70 kmol/h of pure isobutane. The feed is n-butane with 1 mol% impurity, and the purge contains 85% n-butane and 15% impurity. What is the purge flow rate?

  1. 3 kmol/h
  2. 4 kmol/h
  3. 5 kmol/h
  4. 6 kmol/h
Show answer & solution

Answer: (C) 5 kmol/h

Impurity balance: 0.01(70 + P) = 0.15P, so P = 5 kmol/h.

Question 6

What is the purpose of a bypass stream?

  1. To add catalyst
  2. To remove inerts
  3. To recycle products
  4. To divert part of a feed around a unit and mix it with the outlet to control product composition or temperature
Show answer & solution

Answer: (D) To divert part of a feed around a unit and mix it with the outlet to control product composition or temperature

Bypassing is common in blending operations.

Question 7

What is a limiting reactant?

  1. The catalyst
  2. The reactant present in less than the stoichiometric proportion, which determines the maximum product
  3. The solvent
  4. The reactant in excess
Show answer & solution

Answer: (B) The reactant present in less than the stoichiometric proportion, which determines the maximum product

It is completely consumed if the reaction goes to completion.

Question 8

How much calcium nitrate is formed when 56 g of CaO reacts with 63 g of HNO₃?

  1. 8.2 g
  2. 41 g
  3. 82 g
  4. 164 g
Show answer & solution

Answer: (C) 82 g

CaO + 2HNO₃ → Ca(NO₃)₂ + H₂O; HNO₃ (1 mol) is limiting, giving 0.5 mol × 164 g/mol.

Question 9

How is percentage excess of a reactant defined?

  1. (Amount supplied − theoretical amount)/theoretical amount × 100
  2. Amount reacted/supplied × 100
  3. Amount supplied/theoretical × 100
  4. Theoretical/supplied × 100
Show answer & solution

Answer: (A) (Amount supplied − theoretical amount)/theoretical amount × 100

Theoretical amount is based on the limiting reactant.

Question 10

What is the percentage excess oxygen if 1.2 mol of O₂ is supplied to burn 1 mol of carbon to CO₂?

  1. 2%
  2. 12%
  3. 20%
  4. 120%
Show answer & solution

Answer: (C) 20%

(1.2 − 1)/1 × 100.

Question 11

What is the fractional conversion of a reactant?

  1. The fraction converted to the desired product only
  2. The yield of by-products
  3. The fraction left unreacted
  4. The fraction of the reactant fed that is consumed by reaction
Show answer & solution

Answer: (D) The fraction of the reactant fed that is consumed by reaction

Conversion = (moles fed − moles leaving)/moles fed.

Question 12

What is the conversion if 80 mol of a 100 mol feed reacts?

  1. 8%
  2. 20%
  3. 80%
  4. 100%
Show answer & solution

Answer: (C) 80%

80/100 = 0.8.

Question 13

What is selectivity in a reaction system?

  1. The ratio of desired product formed to undesired product formed
  2. The heat of reaction
  3. The conversion
  4. The ratio of product to feed
Show answer & solution

Answer: (A) The ratio of desired product formed to undesired product formed

High selectivity reduces separation costs.

Question 14

What is the difference between single-pass conversion and overall conversion with recycle?

  1. Single-pass conversion includes recycle
  2. Single-pass conversion is across the reactor only; overall conversion is based on fresh feed to the whole process
  3. Overall conversion is always lower
  4. They are always equal
Show answer & solution

Answer: (B) Single-pass conversion is across the reactor only; overall conversion is based on fresh feed to the whole process

Recycle raises overall conversion.

Question 15

A gas contains 10% H₂, 10% O₂, 30% CO₂ and 50% H₂O by moles. If half the water condenses, what is the mole percent of H₂ on a dry basis?

  1. 5%
  2. 10%
  3. 18.18%
  4. 20%
Show answer & solution

Answer: (D) 20%

Dry basis excludes all water: 10/(10 + 10 + 30) = 20%.

Question 16

How much water must be evaporated from 100 kg of a 10% salt solution to concentrate it to 50%?

  1. 40 kg
  2. 50 kg
  3. 80 kg
  4. 90 kg
Show answer & solution

Answer: (C) 80 kg

Salt = 10 kg; final solution = 20 kg; water removed = 80 kg.

Question 17

What is the concentration of the mixture formed by mixing 100 kg of 20% solution with 200 kg of 50% solution?

  1. 30%
  2. 35%
  3. 40%
  4. 45%
Show answer & solution

Answer: (C) 40%

Solute = 20 + 100 = 120 kg in 300 kg.

Question 18

How much water is removed when 100 kg of wet solid with 40% moisture is dried to 10% moisture (wet basis)?

  1. 10 kg
  2. 30 kg
  3. About 33.3 kg
  4. 40 kg
Show answer & solution

Answer: (C) About 33.3 kg

Dry solid = 60 kg; final mass = 60/0.9 = 66.7 kg.

Question 19

100 kg of a 30 wt% aqueous Na₂SO₄ solution is cooled and Na₂SO₄·10H₂O crystallises, leaving a 10% solution. What mass of crystals forms?

  1. About 20 kg
  2. About 32.2 kg
  3. About 45.35 kg
  4. About 58.65 kg
Show answer & solution

Answer: (D) About 58.65 kg

Na₂SO₄ fraction in crystals is 142/322; solving 30 − 0.441C = 0.10(100 − C) gives C ≈ 58.65 kg.

Question 20

80 kg of Na₂SO₄ is present in 330 kg of solution. On cooling, 80 kg of Na₂SO₄·10H₂O crystals separate. What is the weight fraction of Na₂SO₄ in the remaining solution?

  1. About 0.00
  2. About 0.18
  3. About 0.24
  4. About 0.30
Show answer & solution

Answer: (B) About 0.18

Crystals hold 80 × 142/322 = 35.3 kg Na₂SO₄; 44.7 kg remain in 250 kg.

Question 21

How much ammonia is produced from 28 kg of nitrogen by N₂ + 3H₂ → 2NH₃ with complete conversion?

  1. 17 kg
  2. 28 kg
  3. 34 kg
  4. 56 kg
Show answer & solution

Answer: (C) 34 kg

28 kg N₂ is 1 kmol, giving 2 kmol × 17 kg/kmol.

Question 22

How much urea is produced from 34 kg of ammonia by 2NH₃ + CO₂ → CO(NH₂)₂ + H₂O, as in Pakistani fertiliser plants?

  1. 30 kg
  2. 34 kg
  3. 60 kg
  4. 120 kg
Show answer & solution

Answer: (C) 60 kg

2 kmol NH₃ gives 1 kmol urea of molecular weight 60.

Question 23

How much CaO is obtained from 100 kg of CaCO₃ by complete calcination in a cement kiln?

  1. 44 kg
  2. 56 kg
  3. 72 kg
  4. 100 kg
Show answer & solution

Answer: (B) 56 kg

CaCO₃ → CaO + CO₂; 100 → 56 + 44.

Question 24

How much CO₂ is released by the complete calcination of 1 tonne of limestone (pure CaCO₃)?

  1. 100 kg
  2. 440 kg
  3. 560 kg
  4. 1,000 kg
Show answer & solution

Answer: (B) 440 kg

Calcination is a major source of CO₂ in cement production.

Question 25

What is the number of independent material balance equations for a non-reacting system with C components?

  1. C
  2. 2C
  3. C − 1
  4. C + 1
Show answer & solution

Answer: (A) C

An overall balance plus C − 1 component balances is an equivalent set.

Question 26

What is the degree of freedom in material balance calculations?

  1. The number of units
  2. The number of streams
  3. The number of components only
  4. The number of unknowns minus the number of independent equations
Show answer & solution

Answer: (D) The number of unknowns minus the number of independent equations

A problem can be solved when degrees of freedom are zero.

Question 27

What is the recycle ratio?

  1. The ratio of recycle flow to fresh feed (or to product) flow
  2. The purge ratio
  3. The ratio of product to feed
  4. The conversion
Show answer & solution

Answer: (A) The ratio of recycle flow to fresh feed (or to product) flow

Definitions should be stated in each problem.

Question 28

What is the extent of reaction?

  1. The change in moles of a species divided by its stoichiometric coefficient
  2. The rate constant
  3. The conversion percentage
  4. The heat of reaction
Show answer & solution

Answer: (A) The change in moles of a species divided by its stoichiometric coefficient

It is the same for all species in a given reaction.

Question 29

What is the yield of a reaction?

  1. The selectivity only
  2. The excess reactant
  3. The total moles leaving
  4. The amount of desired product formed relative to the amount of reactant fed or consumed
Show answer & solution

Answer: (D) The amount of desired product formed relative to the amount of reactant fed or consumed

Yield definitions vary, so the basis must be stated.

Question 30

What should be chosen first when solving a material balance problem?

  1. The equipment size
  2. The heat balance
  3. The answer
  4. A basis of calculation, such as 100 kg or 100 kmol of feed
Show answer & solution

Answer: (D) A basis of calculation, such as 100 kg or 100 kmol of feed

A convenient basis simplifies arithmetic.

Question 31

What is the theoretical amount of hydrogen needed to react with 28 kg of nitrogen to form ammonia?

  1. 2 kg
  2. 3 kg
  3. 6 kg
  4. 12 kg
Show answer & solution

Answer: (C) 6 kg

1 kmol N₂ needs 3 kmol H₂ (2 kg/kmol).

Question 32

Why are atomic (element) balances useful in reacting systems?

  1. Mass is not conserved
  2. Atoms are conserved even though molecules change
  3. Molecules are always conserved
  4. Moles are always conserved
Show answer & solution

Answer: (B) Atoms are conserved even though molecules change

Total mass is conserved, but total moles may change.

Question 33

Is the total number of moles conserved in a chemical reaction?

  1. Not necessarily, since moles may change according to stoichiometry
  2. Always conserved
  3. Never changes
  4. Only in gases
Show answer & solution

Answer: (A) Not necessarily, since moles may change according to stoichiometry

Mass, not moles, is always conserved.

Question 34

What is the mass of CO₂ produced by burning 12 kg of carbon completely?

  1. 12 kg
  2. 28 kg
  3. 32 kg
  4. 44 kg
Show answer & solution

Answer: (D) 44 kg

C + O₂ → CO₂; 1 kmol C gives 1 kmol CO₂.

Practice these 34 questions interactively →