Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Cost Accounting: Labour and Overheads

Accounting · Cost Accounting

37 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the difference between time-keeping and time-booking?

  1. They are the same
  2. Time-keeping records attendance while time-booking records time spent on jobs
  3. Time-booking records attendance
  4. Time-keeping records jobs only
Show answer & solution

Answer: (B) Time-keeping records attendance while time-booking records time spent on jobs

Both help control labour cost.

Question 2

How is normal idle time usually treated?

  1. As abnormal loss
  2. As selling cost
  3. As direct cost of the job
  4. As production overhead
Show answer & solution

Answer: (D) As production overhead

Abnormal idle time is charged to costing profit and loss.

Question 3

How is overtime premium normally treated in cost accounts?

  1. As production overhead, unless overtime is worked at a customer's request when it is charged to that job
  2. As capital expenditure
  3. Always as a direct cost
  4. As selling cost
Show answer & solution

Answer: (A) As production overhead, unless overtime is worked at a customer's request when it is charged to that job

The basic rate is direct labour.

Question 4

What is the labour turnover rate if 30 employees left and the workforce was 280 at the start and 320 at the end of the year?

  1. 9.4%
  2. 10%
  3. 10.7%
  4. 15%
Show answer & solution

Answer: (B) 10%

30 ÷ average 300 × 100.

Question 5

What is the worker's total pay under the Halsey plan if time allowed is 10 hours, time taken 8 hours and rate Rs 200 per hour?

  1. Rs 1,600
  2. Rs 1,920
  3. Rs 1,800
  4. Rs 2,000
Show answer & solution

Answer: (C) Rs 1,800

8 × 200 + 50% × 2 × 200.

Question 6

What is the worker's total pay under the Rowan plan if time allowed is 10 hours, time taken 8 hours and rate Rs 200 per hour?

  1. Rs 1,800
  2. Rs 2,000
  3. Rs 1,600
  4. Rs 1,920
Show answer & solution

Answer: (D) Rs 1,920

Bonus = 2/10 × 8 × 200 = 320.

Question 7

What is a straight piece rate system?

  1. Paying a fixed amount for each unit produced
  2. Paying per hour worked
  3. Paying a share of profit
  4. Paying a monthly salary
Show answer & solution

Answer: (A) Paying a fixed amount for each unit produced

Earnings vary with output.

Question 8

What is the Taylor differential piece rate system?

  1. Paying a single rate
  2. Paying a fixed salary
  3. Paying a lower rate below standard output and a higher rate at or above standard
  4. Paying by hours
Show answer & solution

Answer: (C) Paying a lower rate below standard output and a higher rate at or above standard

It rewards efficient workers.

Question 9

What is overhead allocation?

  1. Charging overhead to units
  2. Ignoring overhead
  3. Charging a whole item of overhead to a single cost centre that incurred it
  4. Sharing overhead among centres
Show answer & solution

Answer: (C) Charging a whole item of overhead to a single cost centre that incurred it

For example, a department's own supervisor salary.

Question 10

What is overhead apportionment?

  1. Charging overhead to one centre
  2. Charging overhead to sales
  3. Writing off overhead
  4. Sharing common overheads among cost centres on a fair basis
Show answer & solution

Answer: (D) Sharing common overheads among cost centres on a fair basis

Floor area and headcount are common bases.

Question 11

Which basis is most suitable for apportioning factory rent?

  1. Machine hours
  2. Floor area occupied
  3. Value of materials
  4. Number of employees
Show answer & solution

Answer: (B) Floor area occupied

Rent relates to space.

Question 12

Which basis is most suitable for apportioning canteen costs?

  1. Number of employees
  2. Units sold
  3. Floor area
  4. Machine value
Show answer & solution

Answer: (A) Number of employees

Canteen use relates to headcount.

Question 13

Which basis is most suitable for apportioning machinery depreciation?

  1. Units sold
  2. Value of machinery in each department
  3. Number of employees
  4. Floor area
Show answer & solution

Answer: (B) Value of machinery in each department

Depreciation relates to asset value.

Question 14

What is overhead absorption?

  1. Paying overheads
  2. Recording overheads in the ledger
  3. Charging overheads to cost units using a predetermined rate
  4. Sharing overheads among departments
Show answer & solution

Answer: (C) Charging overheads to cost units using a predetermined rate

It completes the overhead process.

Question 15

What is the direct method of reapportioning service department costs?

  1. Reapportioning service costs only to production departments, ignoring services between service departments
  2. Recognising all mutual services
  3. Using simultaneous equations
  4. Ignoring service costs
Show answer & solution

Answer: (A) Reapportioning service costs only to production departments, ignoring services between service departments

It is the simplest method.

Question 16

Which method fully recognises mutual services between service departments?

  1. The step-down method
  2. The high-low method
  3. The direct method
  4. The reciprocal method
Show answer & solution

Answer: (D) The reciprocal method

It uses repeated distribution or equations.

Question 17

How is a predetermined overhead absorption rate calculated?

  1. Budgeted sales ÷ budgeted units
  2. Actual overheads ÷ actual activity
  3. Actual sales ÷ actual units
  4. Budgeted overheads ÷ budgeted level of activity
Show answer & solution

Answer: (D) Budgeted overheads ÷ budgeted level of activity

It is set before the period begins.

Question 18

What is the overhead absorption rate if budgeted overheads are Rs 600,000 and budgeted machine hours are 20,000?

  1. Rs 20 per machine hour
  2. Rs 30 per machine hour
  3. Rs 300 per machine hour
  4. Rs 33 per machine hour
Show answer & solution

Answer: (B) Rs 30 per machine hour

600,000 ÷ 20,000.

Question 19

What is the under- or over-absorption if actual overheads are Rs 650,000 and 21,000 actual hours are worked at an absorption rate of Rs 30 per hour?

  1. Under-absorbed by Rs 20,000
  2. Over-absorbed by Rs 30,000
  3. Under-absorbed by Rs 50,000
  4. Over-absorbed by Rs 20,000
Show answer & solution

Answer: (A) Under-absorbed by Rs 20,000

Absorbed 630,000 is less than actual 650,000.

Question 20

How is over-absorbed overhead treated at the period end?

  1. Ignored
  2. Debited to profit and loss
  3. Credited to the costing profit and loss account
  4. Added to inventory
Show answer & solution

Answer: (C) Credited to the costing profit and loss account

It means too much overhead was charged to products.

Question 21

When is a machine hour rate the most appropriate basis for absorbing overheads?

  1. When only selling costs exist
  2. When production is mainly manual
  3. When there are no machines
  4. When production is mainly machine-intensive
Show answer & solution

Answer: (D) When production is mainly machine-intensive

Overheads then relate to machine time.

Question 22

Why are predetermined overhead rates used instead of actual rates?

  1. They are always exact
  2. Actual overheads are known only after the period ends, so predetermined rates allow timely costing
  3. They avoid any variances
  4. They are required by tax law
Show answer & solution

Answer: (B) Actual overheads are known only after the period ends, so predetermined rates allow timely costing

They also smooth seasonal fluctuations.

Question 23

What is activity-based costing (ABC)?

  1. A method using one factory-wide rate
  2. A method ignoring overheads
  3. A method assigning overheads to products using several activity cost pools and their cost drivers
  4. A tax method
Show answer & solution

Answer: (C) A method assigning overheads to products using several activity cost pools and their cost drivers

It reflects how products consume activities.

Question 24

Which cost driver best suits set-up costs in activity-based costing?

  1. Number of set-ups
  2. Floor area
  3. Direct labour hours
  4. Units sold
Show answer & solution

Answer: (A) Number of set-ups

Set-up cost depends on set-ups, not volume.

Question 25

Which cost driver best suits purchasing department costs in activity-based costing?

  1. Number of employees
  2. Machine hours
  3. Number of purchase orders
  4. Floor area
Show answer & solution

Answer: (C) Number of purchase orders

More orders create more purchasing work.

Question 26

How much set-up cost is charged to product X if set-up costs total Rs 200,000 for 50 set-ups and product X needs 10 set-ups?

  1. Rs 40,000
  2. Rs 100,000
  3. Rs 20,000
  4. Rs 50,000
Show answer & solution

Answer: (A) Rs 40,000

200,000 ÷ 50 = 4,000 per set-up × 10.

Question 27

When is activity-based costing most beneficial?

  1. When all costs are direct
  2. When products are diverse and overheads are high and driven by non-volume factors
  3. When there is only one product
  4. When overheads are tiny
Show answer & solution

Answer: (B) When products are diverse and overheads are high and driven by non-volume factors

Traditional rates then distort costs.

Question 28

What is a cost pool in activity-based costing?

  1. A pool of employees
  2. A pool of cash
  3. A group of products
  4. A group of overhead costs related to one activity
Show answer & solution

Answer: (D) A group of overhead costs related to one activity

Each pool has its own driver.

Question 29

Which is an example of indirect labour?

  1. Raw materials
  2. Salesmen's commission
  3. Wages of factory supervisors and maintenance staff
  4. Wages of machine operators on a specific job
Show answer & solution

Answer: (C) Wages of factory supervisors and maintenance staff

Indirect labour is part of overheads.

Question 30

Which employer contribution in Pakistan funds old-age pensions for private-sector workers and forms part of employee cost?

  1. Contribution to the Employees' Old-Age Benefits Institution (EOBI)
  2. Customs duty
  3. Sales tax
  4. Contribution to the State Bank
Show answer & solution

Answer: (A) Contribution to the Employees' Old-Age Benefits Institution (EOBI)

EOBI covers insured private-sector employees.

Question 31

What is the labour cost per unit if wages are Rs 900,000 and 30,000 units are produced?

  1. Rs 300
  2. Rs 33
  3. Rs 3
  4. Rs 30
Show answer & solution

Answer: (D) Rs 30

900,000 ÷ 30,000.

Question 32

What is the main drawback of a single factory-wide (blanket) overhead rate?

  1. It needs ABC software
  2. It ignores differences in how departments incur and absorb overheads
  3. It is too complex
  4. It is not allowed by law
Show answer & solution

Answer: (B) It ignores differences in how departments incur and absorb overheads

Departmental rates are more accurate.

Question 33

Which capacity level is commonly used to set fixed overhead rates so that rates do not fluctuate?

  1. Idle capacity
  2. Maximum theoretical capacity only
  3. Zero capacity
  4. Normal capacity
Show answer & solution

Answer: (D) Normal capacity

It reflects average expected use over several periods.

Question 34

What is the main aim of a labour incentive scheme?

  1. Raising productivity by linking pay to output or time saved
  2. Increasing idle time
  3. Avoiding attendance records
  4. Reducing wages
Show answer & solution

Answer: (A) Raising productivity by linking pay to output or time saved

Schemes should be simple and fair.

Question 35

What does the step-down method of service cost reapportionment do?

  1. Ignores all service departments
  2. Reapportions service departments one by one, partly recognising services between them
  3. Charges service costs to sales
  4. Fully recognises all mutual services
Show answer & solution

Answer: (B) Reapportions service departments one by one, partly recognising services between them

The order of steps affects results.

Question 36

What is the treatment of abnormal idle time caused by a power breakdown?

  1. It is charged to the job
  2. It is ignored
  3. It is charged to the costing profit and loss account
  4. It is added to direct materials
Show answer & solution

Answer: (C) It is charged to the costing profit and loss account

It should not distort product costs.

Question 37

What do selling and distribution overheads include?

  1. Advertising, salesmen's salaries and delivery van costs
  2. Machine depreciation
  3. Factory rent
  4. Direct materials
Show answer & solution

Answer: (A) Advertising, salesmen's salaries and delivery van costs

They are not part of production cost.

Practice these 37 questions interactively →