What is cost accounting mainly concerned with?
Show answer & solution
Answer: (D) Recording, classifying and analysing costs to find product costs and help management control them
Its users are mainly internal managers.
Accounting · Cost Accounting
42 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is cost accounting mainly concerned with?
Answer: (D) Recording, classifying and analysing costs to find product costs and help management control them
Its users are mainly internal managers.
What is a cost unit?
Answer: (B) A unit of product or service for which cost is ascertained, such as a tonne of cement or a patient-day
Cost units may be single or composite.
What is a cost centre?
Answer: (C) A location, function, person or item of equipment for which costs are accumulated
Examples include the machining or packing department.
What is a profit centre?
Answer: (A) A part of the business responsible for both revenues and costs
Its manager is judged on profit.
What is an investment centre?
Answer: (C) A responsibility centre accountable for revenues, costs and the capital invested in it
ROI and residual income are used to judge it.
What does prime cost consist of?
Answer: (B) Direct materials, direct labour and direct expenses
Prime cost excludes all overheads.
What is conversion cost?
Answer: (A) Direct labour plus production overheads
It is the cost of converting materials into products.
What is the prime cost if direct materials are Rs 50,000, direct labour Rs 30,000, direct expenses Rs 5,000 and factory overheads Rs 20,000?
Answer: (D) Rs 85,000
50,000 + 30,000 + 5,000.
What is the works (factory) cost if direct materials are Rs 50,000, direct labour Rs 30,000, direct expenses Rs 5,000 and factory overheads Rs 20,000?
Answer: (B) Rs 105,000
Prime cost 85,000 plus factory overheads 20,000.
How does a variable cost behave as activity increases?
Answer: (A) Total cost rises in proportion while cost per unit stays constant
Direct materials are a typical example.
How does a fixed cost behave as output increases within the relevant range?
Answer: (C) Total cost stays constant while cost per unit falls
Factory rent is a typical example.
Which cost is the best example of a semi-variable cost?
Answer: (D) An electricity bill with a fixed line rent plus a charge per unit consumed
It has both fixed and variable elements.
What is a step cost?
Answer: (B) A cost fixed over a range of activity that jumps to a higher level when activity passes that range
Supervisors' salaries often behave this way.
What is the relevant range?
Answer: (D) The range of activity within which assumed cost behaviour holds true
Outside it, fixed costs may change.
What is an opportunity cost?
Answer: (C) The benefit given up by choosing one alternative over the next best one
It is relevant to decisions though not recorded.
What is a sunk cost?
Answer: (A) A cost already incurred that cannot be changed by any future decision
Sunk costs are irrelevant to decisions.
What are period costs?
Answer: (D) Costs charged against profit in the period incurred, such as selling and administration expenses
They are not part of product cost.
What are product costs?
Answer: (A) Costs attached to units produced and included in inventory until sold
They are expensed as cost of sales.
What is a controllable cost?
Answer: (C) A cost that a manager can significantly influence at a given level of authority
Responsibility accounting uses this idea.
What is the high-low method of cost estimation?
Answer: (B) A method separating fixed and variable elements using the highest and lowest activity levels
It is quick but less accurate.
What is the variable cost per unit under the high-low method if cost is Rs 70,000 at 10,000 units and Rs 50,000 at 6,000 units?
Answer: (A) Rs 5
20,000 ÷ 4,000 units.
What is the fixed cost under the high-low method if cost is Rs 70,000 at 10,000 units and Rs 50,000 at 6,000 units?
Answer: (B) Rs 20,000
70,000 − (10,000 × 5).
What is the estimated total cost at 8,000 units if fixed cost is Rs 20,000 and variable cost is Rs 5 per unit?
Answer: (C) Rs 60,000
20,000 + 8,000 × 5.
What is the main limitation of the high-low method?
Answer: (D) It uses only two observations, which may not represent normal conditions
Outliers can distort results.
What does least-squares regression do in cost estimation?
Answer: (C) Fits the line that minimises the sum of squared differences between actual and estimated costs
It uses all observations.
In the cost equation y = a + bx, what does b represent?
Answer: (B) Variable cost per unit of the cost driver
x is the level of the cost driver.
In the cost equation y = a + bx, what does a represent?
Answer: (D) Fixed cost
It is the intercept on the cost axis.
What does the coefficient of determination (r²) measure in cost estimation?
Answer: (A) The proportion of the variation in cost explained by the cost driver
Values close to 1 show a good fit.
What does an r² of 0.81 indicate?
Answer: (A) 81% of the variation in cost is explained by changes in the cost driver
It shows strong explanatory power.
What is the range of the correlation coefficient (r)?
Answer: (B) From −1 to +1
Negative values show inverse relationships.
What is a cost driver?
Answer: (C) A factor whose change causes a change in the total cost of an activity
Machine hours and set-ups are examples.
What is the scatter graph method?
Answer: (D) Plotting cost and activity observations and fitting a line by visual inspection
It helps spot outliers.
What is the industrial engineering method of cost estimation?
Answer: (A) Estimating costs by analysing the physical inputs and time required for each activity
It suits repetitive operations with measurable inputs.
What is the account analysis method of cost estimation?
Answer: (C) Classifying each ledger account as fixed, variable or mixed using judgement
It relies heavily on experience.
What does a learning curve describe?
Answer: (D) The cumulative average time per unit falling by a constant percentage each time cumulative output doubles
It applies to labour-intensive tasks.
What is the cumulative average time per unit for 4 units on an 80% learning curve if the first unit takes 100 hours?
Answer: (C) 64 hours
100 × 0.8 × 0.8.
What is the dependent variable in cost estimation?
Answer: (B) The cost being predicted
The cost driver is the independent variable.
What is a cost object?
Answer: (A) Anything for which a separate measurement of costs is desired, such as a product, customer or department
Costs are traced or allocated to cost objects.
What is a direct cost?
Answer: (B) A cost that can be traced to a cost object in an economically feasible way
Indirect costs must be allocated.
What is a differential cost?
Answer: (D) The difference in total cost between two alternatives
It is also called incremental cost.
Which professional body in Pakistan awards the cost and management accountancy qualification?
Answer: (C) Institute of Cost and Management Accountants of Pakistan
ICMA Pakistan members are known as cost and management accountants.
What is multicollinearity in multiple regression?
Answer: (A) High correlation between the independent variables
It makes individual coefficients unreliable.