What are the main stages of mineral exploration?
Show answer & solution
Answer: (C) Reconnaissance, prospecting, detailed exploration and evaluation
Each stage narrows the area and increases detail.
Mining Engineering · Mining Geology & Pakistan Minerals
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What are the main stages of mineral exploration?
Answer: (C) Reconnaissance, prospecting, detailed exploration and evaluation
Each stage narrows the area and increases detail.
Which geophysical method detects magnetite-rich bodies?
Answer: (A) Magnetic survey
Magnetic anomalies reveal iron ores and some intrusions.
Which geophysical method detects differences in rock density?
Answer: (B) Gravity survey
Gravity can locate dense orebodies and basins.
Which geophysical method is particularly useful for disseminated sulphide deposits such as porphyry copper?
Answer: (D) Induced polarisation (IP)
IP measures the chargeability of disseminated sulphides.
Which geophysical method detects conductive massive sulphide bodies?
Answer: (A) Electromagnetic (EM) survey
EM methods respond to electrical conductors.
Which geophysical method is widely used to map coal seams and oil structures at depth?
Answer: (C) Seismic reflection
Seismic waves reflect from rock layer boundaries.
Which geophysical method is used to search for uranium deposits?
Answer: (D) Radiometric (gamma-ray) survey
Radioactive minerals emit gamma rays.
What does electrical resistivity surveying measure?
Answer: (B) The resistance of the ground to electric current flow
It is used for groundwater, clay and some ore studies.
What is stream sediment sampling in geochemical exploration?
Answer: (A) Sampling fine sediments from streams to trace metals back to their source
Anomalies in stream sediments point to mineralised areas upstream.
What is a pathfinder element in geochemical exploration?
Answer: (B) An element associated with an ore that is easier to detect than the ore metal itself
Arsenic is a common pathfinder for gold.
What is remote sensing in mineral exploration?
Answer: (C) Using satellite or airborne images to map geology and alteration
Alteration minerals around porphyry deposits show distinct spectral signatures.
What is core recovery in drilling?
Answer: (D) The length of core recovered divided by the length drilled, as a percentage
Poor recovery makes sampling less reliable.
What is channel sampling?
Answer: (D) Cutting a continuous narrow channel across an exposed ore face to collect a representative sample
Channel samples are taken at right angles to the ore body.
What is a grab sample?
Answer: (A) A sample of loose rock picked up from a pile or face without a systematic method
Grab samples are not reliable for grade estimation.
What is a bulk sample?
Answer: (C) A large sample, often hundreds of tonnes, mined to test grade and processing behaviour
Bulk samples are used for coarse gold and diamonds.
What is coning and quartering?
Answer: (B) A method of reducing a sample by heaping it into a cone, flattening it and taking opposite quarters
Riffle splitters are a faster alternative.
What is a riffle splitter?
Answer: (C) A device that divides a sample into two equal representative parts
Repeated splitting reduces sample size.
What is assaying?
Answer: (B) Chemical analysis to determine the content of valuable metals in a sample
Fire assay is used for gold.
Which assay method is the standard for determining gold in ore samples?
Answer: (A) Fire assay
Fire assay collects gold in lead and measures it after cupellation.
Which quality control samples are inserted with exploration samples to check laboratory accuracy?
Answer: (D) Certified reference standards, blanks and duplicates
QA/QC ensures that assay results are reliable.
How is tonnage of an ore block calculated?
Answer: (D) Volume multiplied by bulk density
Density is measured on drill core or samples.
What is the tonnage of an ore block 100 m long, 50 m wide and 10 m thick with a density of 2.5 t/m³?
Answer: (C) 125,000 t
100 × 50 × 10 × 2.5 = 125,000 t.
How much copper is contained in 1 million tonnes of ore grading 0.5% copper?
Answer: (C) 5,000 t
1,000,000 × 0.005 = 5,000 t.
How much gold is contained in 1 million tonnes of ore grading 2 g/t?
Answer: (B) 2 tonnes
1,000,000 × 2 g = 2,000,000 g = 2 t.
How is the average grade of several samples of different lengths calculated?
Answer: (A) Weighted average using sample lengths
Length weighting gives a correct composite grade.
Which borehole geophysical log is commonly used to identify coal seams?
Answer: (D) Gamma-ray and density logs
Coal has low natural gamma and low density.
What does proximate analysis of coal determine?
Answer: (A) Moisture, volatile matter, ash and fixed carbon
Proximate analysis is the basic commercial analysis of coal.
What does ultimate analysis of coal determine?
Answer: (B) Carbon, hydrogen, nitrogen, sulphur and oxygen
Ultimate analysis gives the elemental composition.
Which instrument measures the calorific value of coal?
Answer: (A) Bomb calorimeter
The sample is burned in oxygen and the heat released is measured.
What is trenching in mineral exploration?
Answer: (D) Digging trenches across mineralised zones to expose bedrock for mapping and sampling
Trenching is cheap where overburden is thin.
What is the purpose of geological mapping in exploration?
Answer: (C) To record rock types, structures and mineralisation at the surface
Maps guide drilling and further exploration.
What is a feasibility study?
Answer: (B) A detailed technical and economic study to decide whether a mining project should go ahead
Feasibility studies include mining, processing, environmental and financial analysis.
Which drilling method gives the best quality samples for geological logging and geotechnical study?
Answer: (D) Diamond core drilling
Core shows rock structure and allows accurate measurements.
What is a drill hole spacing study used for?
Answer: (B) Determining the drilling density needed for a given resource confidence category
Closer spacing increases confidence.
What does the volatile matter content of coal indicate?
Answer: (A) The gases and vapours given off on heating, related to coal rank and ease of ignition
High volatile coals ignite easily and are more prone to spontaneous combustion.
What does a high ash content in coal mean?
Answer: (C) More incombustible residue and lower heating value
Ash reduces energy and increases handling costs.
What is the purpose of a pre-feasibility study?
Answer: (A) To compare options and decide whether a full feasibility study is justified
Pre-feasibility follows resource definition and precedes feasibility.
What does "net smelter return" (NSR) mean?
Answer: (B) Revenue from concentrate after smelting and refining charges are deducted
NSR is used in cut-off grade and valuation calculations.