The experimental design that controls variation in soil fertility in two directions is________?
Show answer & solution
Answer: (C) Latin square design
Treatments appear once in each row and each column.
Agriculture · Agronomy
25 questions, each with the answer and a worked solution.
Practice interactively and track your score →The experimental design that controls variation in soil fertility in two directions is________?
Answer: (C) Latin square design
Treatments appear once in each row and each column.
Randomized complete block design (RCBD) is used when field variation exists in________?
Answer: (B) One direction
Blocks are laid across the gradient of variation.
The significance of differences among several treatment means is tested with the________?
Answer: (C) F-test (analysis of variance)
The F-value is the ratio of treatment variance to error variance.
One hectare is approximately equal to________?
Answer: (B) 2.47 acres
One acre is about 0.405 hectare.
A seed rate of 100 kg per hectare is approximately equal to________?
Answer: (C) 40 kg per acre
100 kg / 2.47 acres ≈ 40.5 kg per acre.
The area of a triangular field is________?
Answer: (D) Half of base × height
Area of a triangle = ½ × base × height.
A farmer harvested 6,000 kg of wheat from 2.5 acres. His yield per acre is________?
Answer: (A) 2,400 kg
6,000 / 2.5 = 2,400 kg per acre.
A wheat crop produced 4 tonnes of grain and 10 tonnes of total biomass per hectare. Its harvest index is________?
Answer: (A) 40%
HI = 4 / 10 × 100 = 40%.
In an intercropping system, partial LERs of maize and soybean are 0.8 and 0.5. The total LER is________?
Answer: (D) 1.3, showing an intercropping advantage
LER = 0.8 + 0.5 = 1.3; values above 1 favour intercropping.
Maize sown with 75 cm row spacing and 20 cm plant spacing gives a plant population of about________per hectare?
Answer: (C) 66,667
10,000 m² / (0.75 m × 0.20 m) ≈ 66,667 plants.
To supply 46 kg of nitrogen, how much urea is required?
Answer: (C) 100 kg
Urea has 46% N, so 46 / 0.46 = 100 kg.
One 50 kg bag of DAP supplies________?
Answer: (A) 9 kg N and 23 kg P2O5
DAP is 18-46-0: 18% and 46% of 50 kg.
One acre is equal to________?
Answer: (C) 43,560 square feet
One acre also equals 4,840 square yards.
Completely randomized design (CRD) is most suitable when________?
Answer: (D) Experimental material is homogeneous, as in labs and greenhouses
In field trials with variable soil, RCBD is preferred.
In a split plot design, the factor that needs larger plots, such as irrigation, is assigned to the________?
Answer: (A) Main plots
Factors needing more precision are placed in sub plots.
Repeating each treatment several times in an experiment is called________?
Answer: (D) Replication
Replication allows estimation of experimental error.
Allotting treatments to plots by chance to avoid bias is called________?
Answer: (A) Randomization
Randomization makes the error estimate valid.
The coefficient of variation (CV) is calculated as________?
Answer: (A) (Standard deviation / Mean) × 100
A low CV indicates a precise experiment.
The least significant difference (LSD) test is used to________?
Answer: (A) Compare pairs of treatment means
It is applied after a significant F-test.
The value of the correlation coefficient (r) lies between________?
Answer: (D) −1 and +1
r = 0 means no linear relationship.
A farmer needs to sow wheat on 5 acres at 50 kg per acre. The total seed required is________?
Answer: (A) 250 kg
5 × 50 = 250 kg.
If the recommended seed rate is 40 kg per acre of fully germinating seed and the seed lot has 80% germination, the actual seed rate should be________?
Answer: (B) 50 kg per acre
40 / 0.80 = 50 kg per acre.
To supply 46 kg of P2O5 per acre, the quantity of DAP needed is________?
Answer: (A) 100 kg
DAP has 46% P2O5, so 46 / 0.46 = 100 kg.
A cotton crop is sown at 75 cm × 30 cm spacing. The plant population per hectare is about________?
Answer: (D) 44,444
10,000 / (0.75 × 0.30) ≈ 44,444 plants.
An irrigation of 3 inches depth is applied to 1 acre. The volume of water applied is________?
Answer: (C) 3 acre-inches
Volume = area × depth = 1 acre × 3 inches.