Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Agronomy: Tillage, Sowing Methods & Field Operations

Agriculture · Agronomy

31 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

The physical condition of soil in relation to plant growth is called________?

  1. Tilth
  2. Texture
  3. Tiller
  4. Tillage
Show answer & solution

Answer: (A) Tilth

Good tilth means a loose, friable, well-aerated seedbed.

Question 2

The breaking and loosening of soil with a plough to prepare a seedbed is called________?

  1. Inter-culture
  2. Secondary tillage
  3. Primary tillage
  4. Puddling
Show answer & solution

Answer: (C) Primary tillage

Primary tillage is the first major opening and loosening of the soil.

Question 3

Clod crushing and levelling of the field with a wooden plank (sohaga) is an example of________?

  1. Secondary tillage
  2. Primary tillage
  3. Zero tillage
  4. Deep tillage
Show answer & solution

Answer: (A) Secondary tillage

Planking refines the seedbed and helps conserve moisture.

Question 4

The implement that cuts and inverts the soil is the________?

  1. Planker
  2. Mouldboard plough
  3. Harrow
  4. Cultivator
Show answer & solution

Answer: (B) Mouldboard plough

The mouldboard plough turns the furrow slice over and buries weeds and residues.

Question 5

Deep tillage with a chisel plough is done mainly to________?

  1. Break the hard pan below the plough layer
  2. Harvest the crop
  3. Sow seed
  4. Apply fertilizer
Show answer & solution

Answer: (A) Break the hard pan below the plough layer

Breaking the hard pan improves root growth and water infiltration.

Question 6

Sowing a crop directly into an unploughed field with little or no soil disturbance is called________?

  1. Deep tillage
  2. Zero tillage
  3. Primary tillage
  4. Puddling
Show answer & solution

Answer: (B) Zero tillage

Zero tillage saves time, fuel and water.

Question 7

In Pakistan's rice-wheat zone, zero tillage is mostly used for sowing________?

  1. Rice after wheat
  2. Wheat after rice
  3. Sugarcane after rice
  4. Cotton after wheat
Show answer & solution

Answer: (B) Wheat after rice

Zero-till drills allow timely wheat sowing into rice stubble.

Question 8

Laser land levelling mainly helps to________?

  1. Control insects
  2. Distribute irrigation water uniformly and save water
  3. Increase the genetic purity of seed
  4. Replace fertilizer
Show answer & solution

Answer: (B) Distribute irrigation water uniformly and save water

A precisely levelled field avoids over- and under-watering.

Question 9

Puddling in rice fields mainly helps to________?

  1. Increase soil aeration
  2. Increase percolation
  3. Reduce percolation losses and control weeds
  4. Increase organic matter
Show answer & solution

Answer: (C) Reduce percolation losses and control weeds

Puddling churns wet soil to create a hard layer that holds water.

Question 10

Covering the soil surface with crop residues or plastic sheet to conserve moisture is called________?

  1. Ridging
  2. Puddling
  3. Planking
  4. Mulching
Show answer & solution

Answer: (D) Mulching

Mulch reduces evaporation, controls weeds and moderates soil temperature.

Question 11

Which type of mulch adds to soil fertility?

  1. Organic mulch
  2. Black polythene mulch
  3. Grey plastic mulch
  4. Transparent plastic mulch
Show answer & solution

Answer: (A) Organic mulch

Organic mulches decompose and add organic matter to the soil.

Question 12

Contour farming is practised mainly to control________?

  1. Soil erosion
  2. Plant diseases
  3. Weeds
  4. Insect pests
Show answer & solution

Answer: (A) Soil erosion

Ploughing and sowing across the slope slows runoff.

Question 13

Dry farming refers to crop production in areas receiving annual rainfall of less than________?

  1. 750 mm
  2. 1500 mm
  3. 3000 mm
  4. 2000 mm
Show answer & solution

Answer: (A) 750 mm

Dry farming relies on moisture conservation without irrigation.

Question 14

A penetrometer is used to measure________?

  1. Soil moisture
  2. Soil temperature
  3. Soil compaction (resistance)
  4. Soil pH
Show answer & solution

Answer: (C) Soil compaction (resistance)

High penetration resistance restricts root growth.

Question 15

Covering moist soil with transparent plastic sheet in hot weather to kill weeds and soil pathogens is called________?

  1. Mulching
  2. Fumigation
  3. Soil solarization
  4. Puddling
Show answer & solution

Answer: (C) Soil solarization

Solar heat raises soil temperature to levels lethal to many pests.

Question 16

Scattering seed by hand over the field surface is called________?

  1. Transplanting
  2. Broadcasting
  3. Dibbling
  4. Drilling
Show answer & solution

Answer: (B) Broadcasting

Broadcasting is quick but gives uneven depth and plant stand.

Question 17

Sowing seed in rows at uniform depth with a seed drill is called________?

  1. Broadcasting
  2. Dibbling
  3. Transplanting
  4. Drilling
Show answer & solution

Answer: (D) Drilling

Drilling gives uniform plant stand and easier weeding.

Question 18

Placing seeds in holes made at fixed spacing is called________?

  1. Drilling
  2. Dibbling
  3. Relay sowing
  4. Broadcasting
Show answer & solution

Answer: (B) Dibbling

Dibbling is used for crops like cotton, maize and vegetables.

Question 19

Raising seedlings in a nursery and then planting them in the field is called________?

  1. Broadcasting
  2. Dibbling
  3. Drilling
  4. Transplanting
Show answer & solution

Answer: (D) Transplanting

Rice, tobacco and many vegetables are transplanted.

Question 20

Sowing crops on raised beds with irrigation furrows between them mainly helps to________?

  1. Save irrigation water
  2. Increase waterlogging
  3. Avoid fertilizer use
  4. Increase seed rate
Show answer & solution

Answer: (A) Save irrigation water

Bed planting of wheat and cotton saves water and improves drainage.

Question 21

Removing extra plants to maintain the desired plant-to-plant spacing is called________?

  1. Gap filling
  2. Thinning
  3. Roguing
  4. Earthing up
Show answer & solution

Answer: (B) Thinning

Thinning reduces competition among crop plants.

Question 22

Re-sowing seed in places where plants have failed to emerge is called________?

  1. Thinning
  2. Roguing
  3. Gap filling
  4. Hoeing
Show answer & solution

Answer: (C) Gap filling

Gap filling helps achieve the optimum plant population.

Question 23

Loosening the soil between crop rows during crop growth is called________?

  1. Planking
  2. Puddling
  3. Hoeing (inter-culture)
  4. Primary tillage
Show answer & solution

Answer: (C) Hoeing (inter-culture)

Hoeing controls weeds and improves aeration.

Question 24

Putting soil around the base of plants, as in sugarcane, maize and potato, is called________?

  1. Thinning
  2. Earthing up
  3. Mulching
  4. Ridging after harvest
Show answer & solution

Answer: (B) Earthing up

Earthing up supports plants against lodging and covers tubers.

Question 25

The machine that cuts, threshes and cleans grain in one operation is the________?

  1. Reaper
  2. Thresher
  3. Combine harvester
  4. Seed drill
Show answer & solution

Answer: (C) Combine harvester

Combines are widely used for wheat and rice harvesting.

Question 26

Separating grain from the ear heads or straw is called________?

  1. Reaping
  2. Winnowing
  3. Grading
  4. Threshing
Show answer & solution

Answer: (D) Threshing

Wheat is threshed with mechanical threshers in Pakistan.

Question 27

Separating chaff and light material from grain with the help of wind is called________?

  1. Reaping
  2. Threshing
  3. Milling
  4. Winnowing
Show answer & solution

Answer: (D) Winnowing

Winnowing is done after threshing.

Question 28

Burning of rice residues in Punjab is a major contributor to________?

  1. Increase in soil organic matter
  2. Better seed germination
  3. Groundwater recharge
  4. Smog and air pollution
Show answer & solution

Answer: (D) Smog and air pollution

Residue retention and zero-till drills are alternatives to burning.

Question 29

The implement used to prepare a fine seedbed and for puddling with rotating blades is the________?

  1. Rotavator
  2. Mouldboard plough
  3. Ridger
  4. Planker
Show answer & solution

Answer: (A) Rotavator

A rotavator pulverizes the soil in one or two passes.

Question 30

The disc plough is especially suitable for________?

  1. Puddled rice fields only
  2. Light sandy soils only
  3. Hard, dry and trashy soils
  4. Seed sowing
Show answer & solution

Answer: (C) Hard, dry and trashy soils

Its rolling discs cut through hard soil and residues.

Question 31

The right soil moisture condition for ploughing, when soil is neither too wet nor too dry, is called________?

  1. Saturation
  2. Wattar (proper moisture) condition
  3. Waterlogging
  4. Wilting point
Show answer & solution

Answer: (B) Wattar (proper moisture) condition

Ploughing at proper wattar gives good tilth and fewer clods.

Practice these 31 questions interactively →