Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Recruitment, Selection & Onboarding: Reliability & Validity of Selection Tests

HRM · Recruitment, Selection & Onboarding

32 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the consistency of scores obtained by the same person on the same or equivalent test called?

  1. Utility
  2. Validity
  3. Reliability
  4. Objectivity
Show answer & solution

Answer: (C) Reliability

An unreliable test cannot be valid.

Question 2

What is the extent to which a test measures what it is supposed to measure called?

  1. Standardization
  2. Consistency
  3. Reliability
  4. Validity
Show answer & solution

Answer: (D) Validity

Validity is the most important property of a selection test.

Question 3

What type of reliability is measured by giving the same test to the same people at two different times?

  1. Test–retest reliability
  2. Parallel forms reliability
  3. Inter-rater reliability
  4. Split-half reliability
Show answer & solution

Answer: (A) Test–retest reliability

High correlation shows stable scores.

Question 4

What type of reliability compares scores on two equivalent versions of a test?

  1. Parallel (alternate) forms reliability
  2. Split-half reliability
  3. Inter-rater reliability
  4. Test–retest reliability
Show answer & solution

Answer: (A) Parallel (alternate) forms reliability

It avoids memory effects of retesting.

Question 5

What type of reliability compares scores on two halves of the same test?

  1. Test–retest reliability
  2. Parallel forms reliability
  3. Split-half (internal consistency) reliability
  4. Inter-rater reliability
Show answer & solution

Answer: (C) Split-half (internal consistency) reliability

It shows whether items measure the same thing.

Question 6

What type of reliability shows the agreement between different raters scoring the same candidate?

  1. Inter-rater reliability
  2. Content validity
  3. Split-half reliability
  4. Test–retest reliability
Show answer & solution

Answer: (A) Inter-rater reliability

It is important for interviews and assessment centres.

Question 7

What type of validity shows that test scores are related to job performance?

  1. Content validity
  2. Criterion validity
  3. Face validity
  4. Construct validity
Show answer & solution

Answer: (B) Criterion validity

Job performance is the criterion.

Question 8

What type of validity shows that a test contains a fair sample of the tasks and skills needed on the job?

  1. Concurrent validity
  2. Content validity
  3. Predictive validity
  4. Criterion validity
Show answer & solution

Answer: (B) Content validity

A typing test for a typist has high content validity.

Question 9

What type of validity shows that a test measures a theoretical trait such as intelligence or leadership?

  1. Concurrent validity
  2. Face validity
  3. Content validity
  4. Construct validity
Show answer & solution

Answer: (D) Construct validity

It is demonstrated through research.

Question 10

What type of validity refers to whether a test appears to measure what it claims, to the test-taker?

  1. Face validity
  2. Construct validity
  3. Predictive validity
  4. Criterion validity
Show answer & solution

Answer: (A) Face validity

It affects candidates' acceptance of the test.

Question 11

Which criterion validation method tests applicants and later compares their scores with job performance?

  1. Concurrent validation
  2. Face validation
  3. Content validation
  4. Predictive validation
Show answer & solution

Answer: (D) Predictive validation

It is considered the more dependable method.

Question 12

Which criterion validation method compares test scores of current employees with their present job performance?

  1. Construct validation
  2. Predictive validation
  3. Concurrent validation
  4. Content validation
Show answer & solution

Answer: (C) Concurrent validation

It is quicker but uses a restricted group.

Question 13

What is the first step in validating a selection test?

  1. Choosing the tests
  2. Cross-validating
  3. Administering the tests
  4. Analysing the job
Show answer & solution

Answer: (D) Analysing the job

Job analysis identifies the criteria for success.

Question 14

What is the second step in validating a selection test?

  1. Cross-validating
  2. Analysing the job
  3. Relating scores to criteria
  4. Choosing the tests that measure required attributes
Show answer & solution

Answer: (D) Choosing the tests that measure required attributes

Tests are chosen to predict job performance.

Question 15

What is the final step in validating a selection test?

  1. Cross-validation and revalidation
  2. Administering the tests
  3. Job analysis
  4. Choosing the tests
Show answer & solution

Answer: (A) Cross-validation and revalidation

It confirms that the test still predicts performance.

Question 16

What does an expectancy chart show?

  1. The organization chart
  2. The relationship between test scores and job performance
  3. The training schedule
  4. The pay structure
Show answer & solution

Answer: (B) The relationship between test scores and job performance

It shows the probability of success at each score range.

Question 17

What does a correlation coefficient close to +1 between test scores and performance indicate?

  1. Negative relationship
  2. High validity
  3. Low validity
  4. No relationship
Show answer & solution

Answer: (B) High validity

Validity coefficients are usually much lower than 1.

Question 18

What is the economic value of using a selection test, compared with its cost, called?

  1. Validity
  2. Fairness
  3. Reliability
  4. Utility
Show answer & solution

Answer: (D) Utility

Utility analysis considers the cost and benefit of better hires.

Question 19

What is the main reason for the reduced use of some written tests in selection?

  1. They take no time
  2. They are always reliable
  3. They are too cheap
  4. They are difficult to validate
Show answer & solution

Answer: (D) They are difficult to validate

Invalid tests can be unfair and legally risky.

Question 20

What is the term for administering and scoring a test in the same way for all candidates?

  1. Utility
  2. Validation
  3. Standardization
  4. Sampling
Show answer & solution

Answer: (C) Standardization

It ensures fairness and comparability.

Question 21

What is the reference group of scores used to interpret a candidate's test result called?

  1. Expectancy chart
  2. Standards of performance
  3. Criteria
  4. Norms
Show answer & solution

Answer: (D) Norms

A score is compared with the scores of a relevant group.

Question 22

Why should selection tests be job-related?

  1. To predict performance accurately and avoid discrimination
  2. To increase test fees
  3. To reduce applicants
  4. To confuse candidates
Show answer & solution

Answer: (A) To predict performance accurately and avoid discrimination

Job-relatedness is the basis of fair selection.

Question 23

What is the statistical measure used to express a test's reliability or validity?

  1. Correlation coefficient
  2. Range
  3. Mean
  4. Mode
Show answer & solution

Answer: (A) Correlation coefficient

It ranges from −1 to +1.

Question 24

Can a test be reliable but not valid?

  1. Only for medical tests
  2. No, validity guarantees reliability only
  3. No, reliability guarantees validity
  4. Yes, it may give consistent results but measure the wrong thing
Show answer & solution

Answer: (D) Yes, it may give consistent results but measure the wrong thing

Reliability is necessary but not sufficient for validity.

Question 25

What is a test that measures job knowledge required for a specific job, such as accounting rules for an accountant, mainly showing?

  1. Construct validity only
  2. Content validity
  3. No validity
  4. Face validity only
Show answer & solution

Answer: (B) Content validity

The test samples the knowledge actually used on the job.

Question 26

What is the term for a test unfairly disadvantaging a particular group without being job-related?

  1. Reliability
  2. Utility
  3. Validity
  4. Adverse impact (test bias)
Show answer & solution

Answer: (D) Adverse impact (test bias)

Valid, job-related tests reduce legal risk.

Question 27

What is the term for the measure of job success, such as performance ratings, against which test scores are compared?

  1. Norm
  2. Criterion
  3. Predictor
  4. Construct
Show answer & solution

Answer: (B) Criterion

Tests are predictors and job performance is the criterion.

Question 28

What is the term for a selection test or tool used to forecast future job performance?

  1. Criterion
  2. Standard
  3. Norm
  4. Predictor
Show answer & solution

Answer: (D) Predictor

Interviews and tests are predictors.

Question 29

Which validation method is usually preferred because it uses actual applicants rather than current employees?

  1. Face validation
  2. Concurrent validation
  3. Predictive validation
  4. Split-half method
Show answer & solution

Answer: (C) Predictive validation

Current employees may differ from applicants in motivation and experience.

Question 30

What happens to the usefulness of a valid test when the selection ratio is very high (most applicants are hired)?

  1. The test adds little value
  2. The test becomes invalid
  3. Reliability doubles
  4. The test becomes more useful
Show answer & solution

Answer: (A) The test adds little value

Tests are most useful when an employer can be selective.

Question 31

What does "cross-validation" of a test mean?

  1. Comparing pay rates
  2. Testing candidates twice
  3. Checking that a test predicts performance in a new sample
  4. Asking two interviewers
Show answer & solution

Answer: (C) Checking that a test predicts performance in a new sample

It confirms results are not due to chance.

Question 32

What is test reliability mainly affected by?

  1. Test length, testing conditions and clarity of items
  2. The company logo
  3. The salary offered
  4. The job title
Show answer & solution

Answer: (A) Test length, testing conditions and clarity of items

Longer, well-designed tests are usually more reliable.

Practice these 32 questions interactively →