Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Test, Measurement, Evaluation & Research: Criteria of a Good Test: Validity, Reliability and Objectivity

Physical Education · Test, Measurement, Evaluation & Research

28 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is validity of a test?

  1. The consistency of test scores
  2. The ease of giving a test
  3. The cost of a test
  4. The degree to which a test measures what it is intended to measure
Show answer & solution

Answer: (D) The degree to which a test measures what it is intended to measure

Validity is the most important criterion of a good test.

Question 2

What is reliability of a test?

  1. The consistency of test results when the test is repeated under similar conditions
  2. Whether the test measures what it claims
  3. The cost of the test
  4. The popularity of the test
Show answer & solution

Answer: (A) The consistency of test results when the test is repeated under similar conditions

A test cannot be valid unless it is reliable.

Question 3

What is objectivity of a test?

  1. The degree to which different testers obtain the same scores
  2. The test's difficulty
  3. The consistency over time
  4. The test's popularity
Show answer & solution

Answer: (A) The degree to which different testers obtain the same scores

It is also called inter-rater (inter-tester) reliability.

Question 4

What is the relationship between reliability and validity?

  1. A valid test is never reliable
  2. A test can be reliable without being valid, but cannot be valid without being reliable
  3. Validity and reliability are the same
  4. Reliability does not matter
Show answer & solution

Answer: (B) A test can be reliable without being valid, but cannot be valid without being reliable

A bathroom scale that always reads 2 kg heavy is reliable but not valid.

Question 5

What is content validity?

  1. The test looks appropriate
  2. The test is cheap
  3. The degree to which a test covers all the important parts of what is being measured
  4. Correlation with a future criterion
Show answer & solution

Answer: (C) The degree to which a test covers all the important parts of what is being measured

It is judged by experts examining the test content.

Question 6

What is face validity?

  1. The test's reliability
  2. Statistical proof of validity
  3. The test's cost
  4. The extent to which a test appears to measure what it should, on the surface
Show answer & solution

Answer: (D) The extent to which a test appears to measure what it should, on the surface

It is the weakest form of validity.

Question 7

What is criterion-related validity?

  1. The degree to which test scores correlate with an accepted standard measure (criterion)
  2. The test is easy
  3. The test is short
  4. The test looks good
Show answer & solution

Answer: (A) The degree to which test scores correlate with an accepted standard measure (criterion)

It includes concurrent and predictive validity.

Question 8

What is concurrent validity?

  1. The consistency of scores
  2. The prediction of future performance
  3. The correlation between a test and a criterion measured at the same time
  4. The appearance of the test
Show answer & solution

Answer: (C) The correlation between a test and a criterion measured at the same time

The 12-minute run is validated against measured VO₂ max.

Question 9

What is predictive validity?

  1. The correlation with a test taken at the same time
  2. The test's objectivity
  3. The test's appearance
  4. The degree to which a test predicts future performance
Show answer & solution

Answer: (D) The degree to which a test predicts future performance

Talent identification tests need predictive validity.

Question 10

What is construct validity?

  1. The test's appearance only
  2. The degree to which a test measures a theoretical concept or trait, such as anxiety or motor ability
  3. The test's cost
  4. The test's length
Show answer & solution

Answer: (B) The degree to which a test measures a theoretical concept or trait, such as anxiety or motor ability

It is used for traits that cannot be measured directly.

Question 11

What is test–retest reliability?

  1. Consistency of scores when the same test is given twice to the same group
  2. Agreement between two testers
  3. Correlation with a criterion
  4. Correlation of two halves of a test
Show answer & solution

Answer: (A) Consistency of scores when the same test is given twice to the same group

The interval between tests should not allow learning or fatigue to affect scores.

Question 12

What is split-half reliability?

  1. Comparing with a criterion
  2. Correlating scores from two halves of a test, such as odd and even items
  3. Using two different testers
  4. Giving a test twice
Show answer & solution

Answer: (B) Correlating scores from two halves of a test, such as odd and even items

The Spearman–Brown formula adjusts it to full test length.

Question 13

What is parallel-forms (equivalent-forms) reliability?

  1. Correlating two halves
  2. Agreement of judges
  3. Giving the same test twice
  4. Correlating scores from two equivalent versions of the same test
Show answer & solution

Answer: (D) Correlating scores from two equivalent versions of the same test

Both forms must measure the same ability at the same difficulty.

Question 14

Which statistic is widely used to measure internal consistency reliability?

  1. Chi-square
  2. Mean
  3. Cronbach's alpha
  4. Range
Show answer & solution

Answer: (C) Cronbach's alpha

Values above about 0.7 are usually considered acceptable.

Question 15

What is the usual range of a reliability coefficient?

  1. −10 to +10
  2. −1 to 0
  3. 0 to 1
  4. 0 to 100
Show answer & solution

Answer: (C) 0 to 1

Values closer to 1 show higher reliability.

Question 16

What is the "administrative feasibility" (usability) of a test?

  1. How practical a test is in terms of time, cost, equipment, space and ease of scoring
  2. How difficult it is
  3. How reliable it is
  4. How valid it is
Show answer & solution

Answer: (A) How practical a test is in terms of time, cost, equipment, space and ease of scoring

A good test must also be practical in school conditions.

Question 17

What is meant by a test having "discrimination" power?

  1. Its cost
  2. Its ability to distinguish between high and low performers
  3. Its length
  4. Its unfairness to some groups
Show answer & solution

Answer: (B) Its ability to distinguish between high and low performers

Tests that everyone passes have little discrimination power.

Question 18

Which factor can reduce the reliability of a test?

  1. Practice trials
  2. Standardised procedures
  3. Trained testers
  4. Unclear instructions and changing testing conditions
Show answer & solution

Answer: (D) Unclear instructions and changing testing conditions

Standardisation improves reliability.

Question 19

What does "standardised test" mean?

  1. A test made up by any teacher
  2. A test with fixed procedures for administration and scoring, and established norms
  3. A test used only once
  4. A test without instructions
Show answer & solution

Answer: (B) A test with fixed procedures for administration and scoring, and established norms

Standardisation allows fair comparison between groups.

Question 20

Why are practice trials often given before a test?

  1. To familiarise subjects with the test and reduce learning effects
  2. To change the norms
  3. To increase errors
  4. To tire them out
Show answer & solution

Answer: (A) To familiarise subjects with the test and reduce learning effects

This improves the reliability of the actual trials.

Question 21

What is "measurement error"?

  1. A failed student
  2. A wrong answer
  3. The difference between an observed score and the true score
  4. A mistake in the rules
Show answer & solution

Answer: (C) The difference between an observed score and the true score

Sources include the tester, the subject, the instrument and the environment.

Question 22

What is the "standard error of measurement"?

  1. The number of errors made
  2. The mean of the scores
  3. The standard deviation of a group
  4. An estimate of how much an individual's observed score is likely to differ from the true score
Show answer & solution

Answer: (D) An estimate of how much an individual's observed score is likely to differ from the true score

A smaller value means a more reliable test.

Question 23

What is "intra-rater reliability"?

  1. The cost of a test
  2. Agreement between different testers
  3. The validity of a test
  4. The consistency of scores given by the same tester on different occasions
Show answer & solution

Answer: (D) The consistency of scores given by the same tester on different occasions

Inter-rater reliability is agreement between different testers.

Question 24

Why should tests be given under the same conditions to all subjects?

  1. To make the test harder
  2. It does not matter
  3. To make the scores comparable and reliable
  4. To save money only
Show answer & solution

Answer: (C) To make the scores comparable and reliable

Weather, surface and time of day can affect results.

Question 25

How does increasing the number of test trials usually affect reliability?

  1. It reduces validity to zero
  2. It increases reliability, as long as fatigue does not set in
  3. It has no effect
  4. It always reduces reliability
Show answer & solution

Answer: (B) It increases reliability, as long as fatigue does not set in

The Spearman–Brown formula predicts this effect.

Question 26

What is "norm validity"?

  1. The degree to which a test's norms suit the group being tested
  2. The test's cost
  3. The test's objectivity
  4. The test's length
Show answer & solution

Answer: (A) The degree to which a test's norms suit the group being tested

Norms from another country may not suit Pakistani students.

Question 27

What is meant by "economy" as a criterion of a good test?

  1. It should need special laboratories
  2. It should be expensive
  3. It should take a whole day
  4. It should be affordable in time, money, equipment and staff
Show answer & solution

Answer: (D) It should be affordable in time, money, equipment and staff

Schools usually prefer simple field tests.

Question 28

Why are field tests often preferred to laboratory tests in schools?

  1. They are more accurate in every case
  2. They are always more valid
  3. They are cheaper, quicker and can test large groups
  4. They need costly equipment
Show answer & solution

Answer: (C) They are cheaper, quicker and can test large groups

Laboratory tests are usually more precise.

Practice these 28 questions interactively →