Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Entomology: Pest Management, Biological Control & Host Plant Resistance

Agriculture · Entomology

46 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

An organism that harms humans, their crops, animals or property, directly or indirectly, is called a________?

  1. Predator
  2. Pest
  3. Parasitoid
  4. Pollinator
Show answer & solution

Answer: (B) Pest

An insect becomes a pest when its numbers cause economic loss.

Question 2

A pest that is present regularly every season and causes serious economic damage is called a________?

  1. Key pest
  2. Minor pest
  3. Occasional pest
  4. Potential pest
Show answer & solution

Answer: (A) Key pest

Cotton bollworms and whitefly are key pests.

Question 3

A pest that normally causes little damage but becomes serious when pesticide misuse kills its natural enemies is called a________?

  1. Secondary pest
  2. Migrant pest
  3. Minor pest
  4. Key pest
Show answer & solution

Answer: (A) Secondary pest

Mites and whiteflies often become secondary pests.

Question 4

The desert locust is an example of a________pest?

  1. Minor
  2. Secondary
  3. Migrant
  4. Occasional
Show answer & solution

Answer: (C) Migrant

Migrant pests move long distances in swarms.

Question 5

The lowest pest population density that causes economic damage is called the________?

  1. Economic injury level (EIL)
  2. General equilibrium position
  3. Economic threshold level (ETL)
  4. Economic damage
Show answer & solution

Answer: (A) Economic injury level (EIL)

EIL is the break-even point between control cost and loss.

Question 6

The pest density at which control measures should be started to prevent the population from reaching the EIL is called the________?

  1. Economic injury level
  2. Economic damage
  3. Economic threshold level (ETL)
  4. Pest outbreak
Show answer & solution

Answer: (C) Economic threshold level (ETL)

ETL is set below the EIL.

Question 7

The amount of injury that justifies the cost of control measures is called________?

  1. Pest outbreak
  2. Economic damage
  3. Pest resurgence
  4. Economic threshold
Show answer & solution

Answer: (B) Economic damage

Control is worthwhile only when expected damage exceeds control cost.

Question 8

The rapid reappearance of a pest in large numbers after insecticide treatment is called________?

  1. Pest outbreak
  2. Pest resurgence
  3. Pest avoidance
  4. Secondary pest
Show answer & solution

Answer: (B) Pest resurgence

Resurgence happens because natural enemies were also killed.

Question 9

A sudden, explosive increase in a pest population over a short period is called________?

  1. Pest avoidance
  2. Biotype
  3. Pest outbreak
  4. Pest resurgence
Show answer & solution

Answer: (C) Pest outbreak

Outbreaks are often linked to favourable weather.

Question 10

Integrated Pest Management (IPM) means________?

  1. Eradicating all insects
  2. Combining all suitable control methods to keep pests below the economic injury level
  3. Using only biological control
  4. Using only insecticides
Show answer & solution

Answer: (B) Combining all suitable control methods to keep pests below the economic injury level

IPM is economical and environmentally safe.

Question 11

Regular field checking of crops to assess pest and natural enemy numbers is called________?

  1. Fumigation
  2. Roguing
  3. Pest scouting
  4. Quarantine
Show answer & solution

Answer: (C) Pest scouting

Zig-zag and diagonal walking patterns are used in pest scouting.

Question 12

Predicting the future population of a pest in the field is called________?

  1. Forecasting
  2. Sampling only
  3. Surveillance only
  4. Scouting
Show answer & solution

Answer: (A) Forecasting

Forecasts help in timely control.

Question 13

The suppression of pests by natural enemies and climate without human effort is called________?

  1. Natural control
  2. Applied control
  3. Legal control
  4. Chemical control
Show answer & solution

Answer: (A) Natural control

Natural control keeps most insect populations in balance.

Question 14

Changing farming practices such as sowing time, crop rotation and sanitation to make the environment unfavourable for pests is called________control?

  1. Genetic
  2. Chemical
  3. Biological
  4. Cultural
Show answer & solution

Answer: (D) Cultural

Cultural control is cheap and safe.

Question 15

Hand-picking of larvae, collecting egg masses and using light traps are examples of________control?

  1. Genetic
  2. Chemical
  3. Biological
  4. Mechanical
Show answer & solution

Answer: (D) Mechanical

Mechanical methods physically remove or kill pests.

Question 16

Use of heat, cold, radiation or humidity to kill pests is called________control?

  1. Cultural
  2. Physical
  3. Mechanical
  4. Chemical
Show answer & solution

Answer: (B) Physical

Sun-drying of grain before storage is a physical method.

Question 17

Use of living natural enemies such as predators, parasitoids and pathogens to control pests is called________control?

  1. Cultural
  2. Biological
  3. Chemical
  4. Legal
Show answer & solution

Answer: (B) Biological

Trichogramma releases are an example.

Question 18

Importing and releasing natural enemies from the pest's native area is called________?

  1. Classical biological control
  2. Chemical control
  3. Conservation
  4. Augmentation
Show answer & solution

Answer: (A) Classical biological control

It is used against invasive pests.

Question 19

Releasing large numbers of laboratory-reared natural enemies is called________?

  1. Augmentation
  2. Quarantine
  3. Conservation
  4. Classical control
Show answer & solution

Answer: (A) Augmentation

Inundative releases of Trichogramma are augmentation.

Question 20

Protecting natural enemies by using selective pesticides and providing shelter is called________?

  1. Augmentation
  2. Classical control
  3. Conservation biological control
  4. Legal control
Show answer & solution

Answer: (C) Conservation biological control

Conservation helps existing natural enemies survive.

Question 21

Releasing sterile males to mate with wild females and reduce the pest population is called________?

  1. Chemical control
  2. Sterile insect technique (genetic control)
  3. Cultural control
  4. Mechanical control
Show answer & solution

Answer: (B) Sterile insect technique (genetic control)

It was used successfully against the screwworm fly.

Question 22

Controlling pests through laws such as plant quarantine is called________control?

  1. Legal (regulatory)
  2. Physical
  3. Cultural
  4. Biological
Show answer & solution

Answer: (A) Legal (regulatory)

Quarantine prevents entry and spread of exotic pests.

Question 23

A free-living animal that kills and eats many prey during its life is called a________?

  1. Predator
  2. Parasite
  3. Parasitoid
  4. Host
Show answer & solution

Answer: (A) Predator

Ladybird beetles, lacewings and dragonflies are predators.

Question 24

An insect whose larva develops inside or on a single host insect and eventually kills it is called a________?

  1. Parasitoid
  2. Scavenger
  3. Predator
  4. Parasite only
Show answer & solution

Answer: (A) Parasitoid

Trichogramma and Cotesia are parasitoids.

Question 25

A parasite that attacks another parasite is called a________?

  1. Hyperparasite
  2. Ectoparasite
  3. Predator
  4. Endoparasite
Show answer & solution

Answer: (A) Hyperparasite

Hyperparasites can reduce the effectiveness of biological control.

Question 26

A parasite that lives inside the body of its host is called an________?

  1. Hyperparasite
  2. Predator
  3. Endoparasite
  4. Ectoparasite
Show answer & solution

Answer: (C) Endoparasite

An ectoparasite lives on the outside of the host.

Question 27

Insects that parasitize or prey on other insects are called________?

  1. Saprophagous
  2. Phytophagous
  3. Entomophagous
  4. Zoophagous
Show answer & solution

Answer: (C) Entomophagous

Phytophagous insects feed on plants.

Question 28

A parasite that completes its life cycle on a single host species is called________?

  1. Facultative
  2. Heteroxenous
  3. Polyphagous
  4. Monoxenous
Show answer & solution

Answer: (D) Monoxenous

Heteroxenous parasites need two or more hosts.

Question 29

Mosquitoes and bed bugs, which visit the host only to feed, are called________parasites?

  1. Permanent
  2. Intermittent
  3. Obligate internal
  4. Hyperparasitic
Show answer & solution

Answer: (B) Intermittent

They leave the host after taking a blood meal.

Question 30

Bacillus thuringiensis (Bt), used as a biopesticide, is a________?

  1. Fungus
  2. Nematode
  3. Virus
  4. Bacterium
Show answer & solution

Answer: (D) Bacterium

Bt toxins kill caterpillars after they eat treated leaves.

Question 31

Nuclear polyhedrosis virus (NPV) is used as a biopesticide mainly against________?

  1. Caterpillars such as Helicoverpa and Spodoptera
  2. Termites only
  3. Aphids
  4. Mites
Show answer & solution

Answer: (A) Caterpillars such as Helicoverpa and Spodoptera

NPV is specific and safe for natural enemies.

Question 32

Beauveria bassiana and Metarhizium are________used to control insects?

  1. Bacteria
  2. Protozoa
  3. Viruses
  4. Fungi
Show answer & solution

Answer: (D) Fungi

They infect insects through the cuticle.

Question 33

Azadirachtin, a natural insecticide and antifeedant, is obtained from________?

  1. Tobacco
  2. Chrysanthemum
  3. Neem
  4. Castor
Show answer & solution

Answer: (C) Neem

Neem products repel and disrupt the growth of many pests.

Question 34

Yellow sticky traps are mainly used to monitor and trap________?

  1. Whiteflies and aphids
  2. Mole crickets
  3. Termites
  4. Grain weevils
Show answer & solution

Answer: (A) Whiteflies and aphids

These insects are attracted to yellow colour.

Question 35

Pheromone traps are used in pest management for________?

  1. Fertilizing crops
  2. Monitoring, mass trapping and mating disruption
  3. Irrigating crops
  4. Killing weeds
Show answer & solution

Answer: (B) Monitoring, mass trapping and mating disruption

Each pheromone is specific to one or a few species.

Question 36

The three mechanisms of host plant resistance described by R.H. Painter are________?

  1. Vertical, horizontal and cross
  2. Non-preference (antixenosis), antibiosis and tolerance
  3. Chemical, physical and biological
  4. Avoidance, escape and immunity
Show answer & solution

Answer: (B) Non-preference (antixenosis), antibiosis and tolerance

Painter published his classic work in 1951.

Question 37

Resistance in which the plant harms the insect's growth, survival or reproduction is called________?

  1. Tolerance
  2. Pest avoidance
  3. Antixenosis
  4. Antibiosis
Show answer & solution

Answer: (D) Antibiosis

Bt cotton works through antibiosis.

Question 38

Resistance in which insects avoid the plant for feeding or egg laying is called________?

  1. Immunity
  2. Antibiosis
  3. Tolerance
  4. Antixenosis (non-preference)
Show answer & solution

Answer: (D) Antixenosis (non-preference)

Hairy or tough leaves can cause non-preference.

Question 39

The ability of a plant to withstand insect attack and still give good yield is called________?

  1. Antibiosis
  2. Immunity
  3. Tolerance
  4. Antixenosis
Show answer & solution

Answer: (C) Tolerance

Tolerant plants recover from or compensate for damage.

Question 40

Resistance that is effective against all biotypes of a pest is called________?

  1. Horizontal (general) resistance
  2. Vertical (specific) resistance
  3. Immunity
  4. Cross resistance
Show answer & solution

Answer: (A) Horizontal (general) resistance

Vertical resistance works against specific biotypes only.

Question 41

A population of an insect species that can attack a previously resistant variety is called a________?

  1. Instar
  2. Morph
  3. Caste
  4. Biotype
Show answer & solution

Answer: (D) Biotype

New biotypes of brown planthopper break rice resistance.

Question 42

Escape of a crop from insect attack due to early sowing or early maturity is called________?

  1. Tolerance
  2. Antibiosis
  3. Pest avoidance (escape)
  4. Resurgence
Show answer & solution

Answer: (C) Pest avoidance (escape)

It is a pseudo-resistance, not genetic.

Question 43

Complete freedom of a plant from attack by a particular insect is called________?

  1. Immunity
  2. Antixenosis
  3. Tolerance
  4. Horizontal resistance
Show answer & solution

Answer: (A) Immunity

True immunity is rare.

Question 44

Resistance of an insect to one insecticide extending to other insecticides with similar mode of action is called________?

  1. Tolerance
  2. Vertical resistance
  3. Cross resistance
  4. Multiple resistance
Show answer & solution

Answer: (C) Cross resistance

Rotating insecticides of different groups delays resistance.

Question 45

High silicon content in rice stems gives resistance to________?

  1. Aphids
  2. Stem borer
  3. Leaf folder
  4. Grain weevil
Show answer & solution

Answer: (B) Stem borer

Hard stems are difficult for young borer larvae to penetrate.

Question 46

Bt cotton contains genes from Bacillus thuringiensis that make it resistant mainly to________?

  1. Jassid
  2. Bollworms (Lepidoptera)
  3. Mites
  4. Whitefly
Show answer & solution

Answer: (B) Bollworms (Lepidoptera)

Bt cotton does not control sucking pests.

Practice these 46 questions interactively →