What is a local area network (LAN)?
Show answer & solution
Answer: (D) A network covering a small area such as a building or campus
LANs are usually privately owned and fast.
Electrical Engineering · Computer Networks
27 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a local area network (LAN)?
Answer: (D) A network covering a small area such as a building or campus
LANs are usually privately owned and fast.
What is a wide area network (WAN)?
Answer: (B) A network covering a large geographical area such as cities or countries
The Internet is the largest WAN.
What is a metropolitan area network (MAN)?
Answer: (C) A network covering a city or large campus area
MANs often use fibre rings.
What is a personal area network (PAN)?
Answer: (A) A short-range network around one person, such as Bluetooth devices
PANs connect phones, earbuds and watches.
Which network topology connects every device through one central connecting device?
Answer: (C) Star topology
Failure of the central switch disables the whole network.
Which topology connects all devices to a single backbone cable?
Answer: (B) Bus topology
Terminators are needed at each end.
Which topology connects each device to exactly two neighbours forming a closed loop?
Answer: (A) Ring topology
Data travels around the ring.
Which topology connects every device directly to every other device?
Answer: (D) Full mesh topology
It is highly reliable but costly.
How many links are needed for a full mesh network of 5 devices?
Answer: (B) 10
Links = n(n − 1)/2 = 5 × 4/2.
What is a tree topology?
Answer: (C) A hierarchical combination of star networks connected to a backbone
It is common in large organisations.
What is the main disadvantage of a bus topology?
Answer: (A) A break in the main cable can stop the whole network
Collisions also increase with more devices.
Which cable type is most commonly used in Ethernet LANs?
Answer: (D) Unshielded twisted pair (UTP)
Cat5e and Cat6 cables are common.
What is the maximum recommended length of a UTP Ethernet cable segment?
Answer: (C) 100 m
Longer runs need switches or fibre.
Which connector is used with twisted-pair Ethernet cables?
Answer: (A) RJ-45
RJ-11 is used for telephone lines.
Why are wires twisted in twisted-pair cables?
Answer: (B) To reduce electromagnetic interference and crosstalk
Twisting cancels induced noise.
Which transmission medium offers the highest bandwidth and immunity to electrical interference?
Answer: (D) Optical fibre
Fibre is used for backbones and long links.
What is simplex communication?
Answer: (D) Data flows in one direction only
Broadcast radio is simplex.
What is half-duplex communication?
Answer: (A) Data flows in both directions, but only one direction at a time
Walkie-talkies are half-duplex.
What is full-duplex communication?
Answer: (B) Data flows in both directions simultaneously
Telephone calls and modern switched Ethernet are full duplex.
What is the difference between bandwidth and throughput in networking?
Answer: (C) Bandwidth is the maximum capacity; throughput is the actual data rate achieved
Congestion and errors reduce throughput.
What is network latency?
Answer: (D) The delay for data to travel from source to destination
It is measured in milliseconds.
What is a client–server network?
Answer: (C) A network where clients request services from dedicated servers
Peer-to-peer networks have no central server.
What is an intranet?
Answer: (A) A private network using Internet technologies within an organisation
Access is limited to authorised users.
Which Ethernet cable category supports 1 Gbps reliably over 100 m and 10 Gbps over shorter distances?
Answer: (B) Cat6
Cat6A supports 10 Gbps over 100 m.
What is the main advantage of a star topology?
Answer: (D) A faulty cable affects only one device, and faults are easy to isolate
The central switch is the single point of failure.
What is the main advantage of a mesh topology?
Answer: (B) High reliability because multiple paths exist between devices
It is used in backbone and critical networks.
What is Ethernet's typical speed for modern office networks?
Answer: (A) 1 Gbps to the desktop
10 Gbps and higher are used for servers and backbones.