What is a narrative note in documenting internal control?
Show answer & solution
Answer: (C) A written description of the system and its controls
It is suitable for simple systems.
Auditing · Internal Control & IT Audit
40 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a narrative note in documenting internal control?
Answer: (C) A written description of the system and its controls
It is suitable for simple systems.
What is the main advantage of flowcharts for documenting systems?
Answer: (A) They show the flow of documents and controls clearly, making weaknesses easier to identify
They are useful for complex systems.
What is the main disadvantage of flowcharts?
Answer: (C) They can be time-consuming to prepare and difficult to update
Software can make preparation easier.
What does an internal control questionnaire (ICQ) ask?
Answer: (D) Whether specific controls exist, usually with "yes" or "no" answers
A "no" answer indicates a possible weakness.
What does an internal control evaluation questionnaire (ICEQ) focus on?
Answer: (B) Whether key control objectives are achieved and how errors could occur
It concentrates on significant errors or frauds.
What is a walkthrough?
Answer: (A) Tracing one or a few transactions through the system to confirm the auditor's understanding
It confirms documentation is accurate.
What is the difference between evaluating the design of a control and testing its operating effectiveness?
Answer: (B) Design evaluation considers whether the control could prevent or detect misstatements, while testing checks it worked throughout the period
Both are needed to rely on controls.
Which procedure provides the strongest evidence of a control's operation?
Answer: (D) Reperformance of the control by the auditor
Inquiry alone is never enough.
What is "inspection" as a test of controls?
Answer: (A) Examining documents for evidence that a control was performed, such as signatures of approval
Signatures show approval occurred.
What is "observation" as a test of controls?
Answer: (C) Watching a control being performed, such as a stock count procedure
It provides evidence only at the time observed.
What is the main limitation of observation as a test of controls?
Answer: (D) Staff may perform the control properly only while being observed
Other evidence is needed for the full period.
What is a "deviation" in tests of controls?
Answer: (B) A departure from the prescribed control procedure
Deviations are counted against the tolerable rate.
What does the auditor do if the deviation rate in a test of controls exceeds the tolerable rate?
Answer: (A) Conclude the control is not effective and increase substantive testing
Control risk is reassessed as higher.
What factor increases the sample size for tests of controls?
Answer: (C) A greater intended reliance on the control
More reliance requires more evidence.
Which factor decreases the sample size for tests of controls?
Answer: (C) A higher tolerable rate of deviation
The relationship is inverse.
What is the "risk of over-reliance" in tests of controls?
Answer: (D) The risk of concluding a control is more effective than it actually is
It affects audit effectiveness.
What is the "risk of under-reliance" in tests of controls?
Answer: (B) The risk of concluding a control is less effective than it actually is
It affects audit efficiency.
What should be included in a written communication of significant deficiencies to those charged with governance?
Answer: (A) A description of the deficiencies and an explanation of their potential effects
Recommendations are also usually included.
What is the usual structure of a point in a management letter?
Answer: (B) The deficiency, its implications and a recommendation
Management responses may be added.
Who should receive communication of deficiencies that are not significant?
Answer: (C) Management at an appropriate level
ISA 265 permits oral or written communication for these.
Why must the auditor document the understanding of internal control?
Answer: (A) To support risk assessment and show the basis for planned procedures
Documentation is required by ISA 315 and ISA 230.
What is the purpose of updating systems documentation each year?
Answer: (D) Reflecting changes in the client's systems and controls
Unchanged documents may be misleading.
What should the auditor do when a test of controls reveals that a key control was not performed for two months?
Answer: (D) Consider the control ineffective for that period and perform more substantive work for those months
Gaps reduce reliance.
Which test best confirms that bank reconciliations are reviewed?
Answer: (B) Inspecting reconciliations for evidence of independent review and reperforming a sample
Evidence should show who reviewed and when.
Which test best confirms that credit limits are enforced by the system?
Answer: (A) Attempting to process a test order above the limit or inspecting system configuration and logs
Automated controls can be tested once if ITGCs are effective.
What is the "test of one" approach for automated controls?
Answer: (C) Testing an automated control once, provided IT general controls over it are effective
Automated controls operate consistently.
What is the advantage of combining narrative notes with flowcharts?
Answer: (D) They give both a detailed description and a visual overview of the system
Firms often use both.
What is a "control deviation" caused by a missing approval signature evidence of?
Answer: (B) The control may not have operated for that transaction
The cause should be investigated.
Which symbol in a flowchart commonly represents a document?
Answer: (C) A rectangle with a wavy bottom edge
Standard symbols aid understanding.
Which symbol in a flowchart commonly represents a decision?
Answer: (A) A diamond
Decisions branch the flow.
What is the purpose of documenting a control's "frequency" and "owner"?
Answer: (A) Identifying how often the control operates and who performs it, to plan tests
Sample sizes depend on frequency.
How does control frequency affect sample size for tests of controls?
Answer: (D) Controls performed more often generally require larger samples
Firms use tables based on frequency.
What should the auditor do if a control was changed during the year?
Answer: (C) Test both the old and new controls for the periods they operated, if relying on them
Reliance must cover the whole period.
What evidence would show that a manager's review of exception reports is effective?
Answer: (C) Signed reports with notes of follow-up actions taken on exceptions
The auditor checks that exceptions were resolved.
What is the main purpose of tests of controls in the audit?
Answer: (D) Obtaining evidence that controls operated effectively so that control risk can be assessed as lower
Effective controls reduce substantive work.
What should the auditor do if a significant deficiency is found during the interim audit?
Answer: (B) Communicate it promptly and consider its effect on the planned audit approach
Timely communication allows corrective action.
What is "tolerable rate of deviation"?
Answer: (A) The maximum rate of deviation the auditor will accept while still relying on the control
It is set during planning.
What is the effect of expected deviations being close to the tolerable rate?
Answer: (D) The auditor may decide not to rely on the control because the sample would be very large
Substantive procedures may be more efficient.
Which document is most useful in understanding the flow of a client's purchase cycle?
Answer: (A) A systems flowchart prepared from walkthroughs
It shows documents and controls.
What is the difference between internal control documentation by management and by the auditor?
Answer: (B) Management documents controls to operate and monitor them, while the auditor documents them to plan the audit
Auditors may use client documentation if reliable.